Which Shank Will Fit Blue Ox SwayPro for 2.5 inch Trailer Hitch

Question

Question:

I have the blue ox sway pro. can i use this shank to mount directly into my f250 2.5 hitch receiver. It seems as though its not very long going into the receiver like others. thanks

asked by: Dennis

0

Expert Reply:

Hey Dennis, the Gen-Y shank part # GY98ER only works with Gen-Y weight distribution systems for 2.5 inch hitches. It wouldn't work with a Blue Ox system so what you'd need is one like the part # BXW4028 which fits your Blue Ox system and also does the 2.5 inch hitch. How do you like the SwayPro so far?

expert reply by: Jameson C

0

Answer 1

Hey Josh, yes the Gen-Y weight distribution shank part #GY98ER that you referenced can work with Blue Ox SwayPro weight distribution systems.

view full answer...

Answer 2

In regards to choosing the correct weight distribution shank, you really only need to pay attention to the hitch size and rise/drop. The brand won't matter as much as they are all pretty much universal in this regard. The Equal-i-zer Weight Dist…

view full answer...

Answer 3

Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I strongly agree with you not…

view full answer...

Answer 4

Hi Jordan! You are absolutely correct. The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop #EQ90-02-4800 will work with your Reese weight distribution system, but you will need to adjust it a little due to the different…

view full answer...

Answer 5

No, use of the Timbren suspension enhancements like the Timbren Rear Suspension Enhancement System #TDRTT1500 will not void your warranty. You are protected by the Federal Magnuson-Moss Warranty Act. This act says if something breaks on your vehicle…

view full answer...

Answer 6

With you slide in truck camper causing the passenger side of your 2022 Ford F-350 Dually 2WD to sag more than the drivers side, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88391 are going to be the best option for you. The air bag…

view full answer...

Answer 7

For your 2020 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-127-54 and the 1,500 lb kit part #SSR-127-47. Basically you want to go with the lightest duty kit…

view full answer...

Answer 8

The SumoSprings Rebel Custom Helper Springs are only rated to -25 degrees Fahrenheit so if you'll be using the truck in temperatures below this then you may have to consider other options like the Timbren Rear Suspension Enhancement System. The…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which Shank Will Fit Blue Ox SwayPro for 2.5 inch Trailer Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching