Can Gen-Y Weight Distribution Shank be Used with Blue Ox SwayPro Weight Distribution System

Question

Question:

Will this work with the Blue Ox SwayPro system?

asked by: Josh

0

Expert Reply:

Hey Josh, yes the Gen-Y weight distribution shank part # GY98ER that you referenced can work with Blue Ox SwayPro weight distribution systems.

expert reply by: Jameson C

0

Jameson C.

11/17/2025

Hey Josh, how did things go using the Gen-Y weight distribution shank with your Blue Ox SwayPro setup? Knowing how it performed could help others looking to pair the same components.

Answer 1

Hey Dennis, the Gen-Y shank part #GY98ER only works with Gen-Y weight distribution systems for 2.5 inch hitches. It wouldn't work with a Blue Ox system so what you'd need is one like the part #BXW4028 which fits your Blue Ox system and also…

view full answer...

Answer 2

Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I strongly agree with you not…

view full answer...

Answer 3

In regards to choosing the correct weight distribution shank, you really only need to pay attention to the hitch size and rise/drop. The brand won't matter as much as they are all pretty much universal in this regard. The Equal-i-zer Weight Dist…

view full answer...

Answer 4

No, use of the Timbren suspension enhancements like the Timbren Rear Suspension Enhancement System #TDRTT1500 will not void your warranty. You are protected by the Federal Magnuson-Moss Warranty Act. This act says if something breaks on your vehicle…

view full answer...

Answer 5

Hi Jordan! You are absolutely correct. The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop #EQ90-02-4800 will work with your Reese weight distribution system, but you will need to adjust it a little due to the different…

view full answer...

Answer 6

With you slide in truck camper causing the passenger side of your 2022 Ford F-350 Dually 2WD to sag more than the drivers side, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88391 are going to be the best option for you. The air bag…

view full answer...

Answer 7

For your 2020 Ford F-250 Super Duty there are two SumoSprings options that fit your truck like you mentioned. There's the 2,800 lb kit part #SSR-127-54 and the 1,500 lb kit part #SSR-127-47. Basically you want to go with the lightest duty kit…

view full answer...

Answer 8

The SumoSprings Rebel Custom Helper Springs are only rated to -25 degrees Fahrenheit so if you'll be using the truck in temperatures below this then you may have to consider other options like the Timbren Rear Suspension Enhancement System. The…

view full answer...

Answer 9

We can get you set up with a weight distribution hitch for your 2006 Jayco Jay Flight 31BHDS, though the SwayPro #BXW2000 isn't rated correctly for that trailer. That hitch is for tongue weights between 1,500 lbs and 2,000 lbs, andthe '06 Jay…

view full answer...

Answer 10

Hello Loni. No, the Weight Distribution Shank for Gen-Y Hitch Adjustable Ball Mounts w/ 2-1/2" Receivers - 21K #GY98ER is not compatible because it has a 3/4" pin hole diameter, and the Fastway e2 requires a standard 5/8" pin hole…

view full answer...

Answer 11

Yes, you can use the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-625 to flat tow with. This adjustable ball mount has a 21,000 lbs capacity and fits a 2-1/2" hitch. It is compatible with the Blue Ox Base Plate Kit item…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can Gen-Y Weight Distribution Shank be Used with Blue Ox SwayPro Weight Distribution System

Product Page this Question was Asked From

Continue Researching