bing tracking image
Q & A Icon

Easy to Install Tow Bar Lighting Kit and Charge Wire Recommendation for 2021 Jeep Gladiator  

Updated 06/22/2026 | Published 06/17/2026

Question:

I need a flat tow wiring harness kit for a 2021 Jeep Gladiator Mojave with LED taillights. Towing with a Blue Ox tow system and a Blue Ox Patroit braking system. I am looking for a plug in system like the Curt one, but I amnot sure whther it will work with my Truck and components. I also need ot make certain there is a tirckle charge tot he battery from the 7 pin outlet ont ehmotorhome becuase with LEd lights, braking turns on the trucks computers and this will drain the battery on a long trip.

0

Expert Reply:

Hey Barry, we have the Curt tow bar lighting kit part # C96JR that is a confirmed fit for your 20221 Jeep Gladiator and is a simple plug in type install like what you are looking for.

Then for a charge line to make sure your Gladiator battery is topped off you would want the Roadmaster part # RM-156-75 which runs a charge wire from the trailer wiring of your tow vehicle up to the battery of it. To then run a charge line from Gladiator battery to the connector you would want the part # RM-156-25.

expert reply by:
0
Jameson C
Gary T. profile picture

Gary T.

6/19/2026

Worked fine with my 2023 gladiator easy to install

Tony W. profile picture

Tony W.

6/19/2026

I installed the wiring harness and the battery charge kit on my 2026 Wrangler Sport S. My Wrangler has the stock tail lights, the wiring kit works great, just as advertised. I did remove the flat 4 wire plug that came wired with the harness. I purchased a 5 pin? Tow vehicle plug, mounted it to the front of the jeep and used the 5th pin for the battery charge circuit. You will need to purchase a 7 pin to 5 pin coiled wire connecting cable (e trailer) and connect the constant 12 volt circuit from the tow vehicle 7 pin to the correct terminal of the 5 pin outlet.

Darren S. profile picture

Darren S.

6/21/2026

I just installed this harness on a 2026 Wrangler Rubicon with no issues. Plug and play into the taillights and ran the wires up through the frame to a 6-pin connector on my Blue Ox base plate.

Nathan profile picture

Nathan

6/21/2026

This was very easy to install, and I’ve gone on long multi day trips without charging the gladiator battery and there has been no issue for me.

Jameson C. profile picture
Etrailer Expert

Jameson C.

6/22/2026

@Nathan that's awesome to hear!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>