Replacement Hub With 6 on 5-1/2 Bolt Pattern For Pace American Enclosed Trailer With 5,200 lb Axles
Updated 05/10/2026 | Published 05/07/2026
Products Featured in This Question
Question:
Hello, I just recently bought a used Pace American 24foot enclosed trailer. One of the hubs is making some scraping noise as if the bearing either needs grease or completely replaced. Im debating replacing the whole hub assembly. though my main question is, based on the info tag Ive uploaded. Could someone possibly provide some guidance to me on what type of hub and or bearings I need to purchase that will fit my trailer? The lug pattern is 6 on 5 1/2. Thanks!
asked by: Jared F
(click to enlarge)
Expert Reply:
Hey Jared, thanks for the picture! I would definitely replace the bearings and not just add grease. Replacing the entire hub with bearings takes care of everything so you don't have to worry about it.
Since you have 5,200 lb axles you can use the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles # AKHD-655-6-EZ-K as a replacement. These have a 6 on 5-1/2 bolt pattern and come pre-greased with bearings. These are also compatible with the etrailer Electric Trailer Brakes # AKEBRK-7-SA you were looking at.
What are you hauling with your Pace American?
(click to enlarge)
Ken
5/10/2026
I bought the above hun & drum assembly-installation couldn’t be easier. When you take yours apart, make sure the stub axle isn’t scored before reassembly.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Why the Caliber Vehicle Ramps with Wheel Chocks Stand Out – Manufacturer Interview
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 6 on 5-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Caliber Vehicle Ramps with Wheel Chocks - 20,000 lbs
- Q&A: How to Add Timbren Axleless Suspenion to a Trailer and Use 5 x 5 Lug Jeep Wheels
- Q&A: Does Maxxis ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel Come With Lug Nuts
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Center Cap for a AC-375TT
- Q&A: Are There Exact Hanger Spacings to Use with Terran Slipper Spring Hanger Kit # TX85VJ
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Axle, Brake Assemblies, And Hubs And Drums For M1101 Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Upgrading Aftermarket Aluminum Wheels 15" and 16" For Camper And Utility Trailer
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Raise Your Travel Trailer Height
Jared F.
5/9/2026
Hey Robin, thank you for that info! I'll mainly be hauling my 03 Mustang GT, with some other odds and ends in it as well. Such as tool boxes, spare tires etc.