Replacement for Lippert 122096
Updated 05/08/2026 | Published 05/05/2026
Products Featured in This Question
Question:
Hi i have a drum its lippert 122096, 211215 the shoes are 12x2 just want to make sure I get the right one. Thank you
asked by: Steve S
Expert Reply:
Hey Steve! The Easy Grease Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K can replace your Lippert 122096. The Lippert hub is rated for 7,000 lbs with an 8 on 6-1/2 bolt pattern and 1/2" studs so this is a direct match.
This is the same hub you ordered a couple years ago, so if it is the same trailer you already know it will work. If you need replacement brakes as well you can use the # AKEBRK-7-SA.
What trailer are you working on?
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer lug nuts
- Search Results: lippert
- Search Results: lippert 122096
- Search Results: ez lube zerk
- Shop: Lippert 60-Degree Cone Trailer Wheel Lug Nut - 1/2"-20 - Qty 6
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: Recommended Hubs And Brakes For A Lippert 7,000 lb Axle
- Shop: Dexstar Conventional Steel Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Silver Powder Coat
- Shop: Dexstar Steel Mod Trailer Wheel- 16" x 6" Rim - 8 on 6-1/2 - Black
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Fifth Wheel Towing Made Simple with Daniel
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Measuring To Choose The Right Trailer Axle
on Trailer Hubs and Drums
Earle T.
5/8/2026
Currently my project today and tomorrow is to put the underbelly back up under my 5th wheel after a rat got in and chewed wires and hydraulic hoses for my stabilizers (I hate rats). 2 of 4 of my original Dexter brake drums, shoes, backing plates and mags destroyed themselves so I went online to etrailer.com and found too many options for brakes. I called etrailer and was guided through all the parts I needed so I replaced all 4 of everything brakes. The only hard part was getting the shoes to grab and my neighbor told me to drive it while holding the brakes on until I got some peddle out of them. Drug that thing about 4 miles and it worked. I like these new brakes as they work very well!