bing tracking image
  1. Trailer Hubs and Drums
  2. TruRyde
  3. 8 on 6-1/2 Inch
  4. For 7000 lbs Axles
  5. Hub with Drum
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
  9. 17-1/2 Inch Wheel
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TruRyde

Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased

Part Number: TRU98AV
In Stock
$152.46
Trailer Hubs and Drums
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included. Great Prices for the best trailer hubs and drums from TruRyde. Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased part number TRU98AV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (22)
  • Q & A (0)
  • Videos (2)
  • Photos

TruRyde Trailer Hubs and Drums - TRU98AV

  • 8 on 6-1/2 Inch
  • For 7000 lbs Axles
  • Hub with Drum
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • Pre-Greased
  • Standard
  • 25580 / 14125A
  • Standard Grade
  • 1/2 Inch Stud
  • TruRyde

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included.


Highlights

  • Fits 7,000-lb Axles: Works with #42 spindles using inner bearing 25580 and outer 14125A.
  • Ready for Your Setup: Works with both electric and hydraulic 12" x 2" drum brake assemblies.
  • Pre-Greased and Ready to Install: Includes bearings, races, seal, grease cap, and lug nuts.
  • 8 on 6-1/2" Bolt Pattern: For wheels using 1/2" studs; supports 16" - 17-1/2" wheel sizes.
  • Built to Resist Rust and Wear: Zinc-enriched drum paint and zinc-finished bolts resist corrosion.

Specs

Application:

  • Application: 7,000-lb axles with #42 spindles
  • Compatible with: Standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO

Dimensions:

  • Actual drum dimensions: 12-15/16" diameter diameter x 2-3/8" wide
  • Works with: 12" brake assembly
  • Grease cap flange diameter: 2.72"

Bolt Pattern and Studs:

  • Bolt pattern: 8 on 6-1/2"
  • Wheel studs: 1/2" diameter x 1-5/16" long

Weight and Capacity:

  • Weight capacity: 3,500 lbs

Warranty:

  • Limited warranty: 1-year

Bearing, Race, and Seal Information:

  • Bearings (included):
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included):
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"


PP-RVDK-8PG Tru Ryde 12" Hub and Drum Assembly for 7K Axle with Hardware - 8 on 6-1/2 - Pre Greased





Video of Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of TruRyde Trailer Hubs and Drums - Hub with Drum - TRU98AV

Hi everyone, Stephen here with etrailer. Today we're taking a look at the TruRyde Trailer Hub and Drum Assembly for 7,000 pound axles. Now, folks, this features a 12 inch diameter hub and drum assembly with an eight on six-and-a-half inch lug pattern. Now I do wanna point out this particular unit fits a number 42 spindle, but it uses half inch studs. So if you have nine-sixteenth inch studs, this won't work for you and you need part number TRU48AV providing everything else matches up other than those studs. So, again, today we're looking at the half inch stud option.

So folks, whenever you need a replacement, this is probably a great option for you. Check the bearing numbers inner and outer, the races, the seal, make sure everything matches up with what you currently have. And once it does, including that lug pattern and that stud size, then you're good to go. So again, you do get all the lug nuts here. You do get the grease cap and this is gonna have, or the dust cap, whatever you wanna call it.

And this does have the rubber plug center in it. So if you have E-Z Lube spindles, you can take that rubber plug out and do your maintenance as needed. As you can see, it's heavy duty. It does have a very nice corrosion-resistant finish over the whole assembly. And of course you have the grease seal and the inner bearing there in the back.

And once again, everything comes pre-greased ready to go out of the box. So I like that option because now let's just say you have some for regular maintenance, one, it's ready to go. That's gonna speed up time. But me personally, I like to carry an extra hub assembly, maybe some extra bearings at minimum with me in my toolbox, especially on longer trips, just for the what if factor. That's just me, I'm a little overprotective I think.

But sometimes some trailer parts can be harder to find when you're on the road, depending on where you're at in your location. So that's just one recommendation for me personally. But again, if you're just doing regular maintenance and you need an upgrade or a replacement, this is a great option. It's very comparable to Dexter, etrailer brands, et cetera. So if you have any questions about this or any of the products, reach out to us. We're more than happy to assist you. I'm Stephen, thanks so much for your time. Thanks for watching and as always, stay safe while you're towing.

Customer Satisfaction Score:

Ratings & Reviews

4.5

22 reviews
Review sort icon
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included.

by:



by:



by:



by:



by:



by:



by:



by:

Came missing two lug nuts. Not a big deal, but annoying to that I have to go buy a couple more. They seem to have slipped out the bottom of a hole in the box. Seems like a quality product other than that.



by:

FAST delivery, and great quality parts!



by:

Easy install



by:

Well made product and very easy to install. Would definitely recommend them. Everything I needed was included.



by:

They say they are pre greased but the amount of grease in them is very minimal. The outer bearings had no grease between the race and the rollers.



by:

Perfect fit. I was skeptical about the off brand name but it is a quality piece and made in the USA. Only downside was the hub had shifted in the box during shipping and it bent the grease cap beyond repair. I reused my old cap, that's the reason for four stars.



by:



by:



by:



by:



by:

Fast delivery, and not to expensive.



by:

Easy. Clean. Fully assembled.



by:

Very easy to work with and fast shipmen t.



by:

A step below the Dexter option. Imo.



by:

I am quite disappointed. One of the hub assemblies is missing 4 lug nuts and 2 have damaged center caps.


22
22

See what our Experts say about this TruRyde Trailer Hubs and Drums

  • Difference Between TruRyde Hub/Drums TRU98AV And TRU48AV
    Hi Michael! The only difference between the TruRyde Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # TRU98AV and TruRyde Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # TRU48AV is the lug size. # TRU98AV -1/2" Lugs # TRU48AV -9/16" Lugs Other than that, they are exactly the same. Same bearings, seals, and capacities. What trailer are you wanting these for? And do you know what size lugs you currently...
    view full answer...

Info for this part was:

Employee Joshua S
Video Edited:
Joshua S
Employee Steven C
Installed by:
Steven C
Employee Matthew S
Written by:
Matthew S
Employee Amanda M
Updated by:
Amanda M
Employee Katherine B
Edited by:
Katherine B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.