What Is Included With The Timken Bearing Kit TMK72VR?

Question

Question:

Is this 4 sets for 4 hubs?

asked by: Dan W

0

Expert Reply:

Hey Dan, welcome back. The Timken Bearing Kit # TMK72VR comes with one set of bearing - enough for one hub. You get both bearings, races, grease seal and cotter pin. I've included a picture that shows exactly what is included.

expert reply by: Jesse M

0

Timken Bearing Kit, LM67048/25580 Bearings, LM67010/25520 Races, 412920 Seal
(click to enlarge)

Dan W.

4/28/2026

For $93 that’s a rip off!!

Jesse M.

4/28/2026

@DanW Yea I hear where you are coming from, but Timken bearings are the only trailer bearings still made here in the USA so they are pretty proud of them lol. If you don't care where they are made, we do have an equivalent kit part # BK3-300 which is a bit more reasonably priced.

James W.

4/29/2026

@DanW Hi Dan, It sounds like a lot at first; however, I think Timken bearings are the best you can buy. My trailer is a utility trailer originally built in the mid-1960's using a house trailer axle to haul 2 snow mobiles. My friend and I converted it haul meat and camping gear for hunting in the late 1970s. I now own it and have been using it for over 35 years going to the Rocky Mountains from Massachusetts and New Hampshire. When on a 2500-to-3500-mile one way road trip, I don't want to worry about bearings. Please note: This is the first time I have replaced the original Timken bearings, and they fit the axles perfectly.

Jesse M.

4/30/2026

@JamesW That's great feedback, James. Glad to hear the Timken bearings are holding up so well. There is definitely something to be said for stuff made here is the USA and not overseas. Thanks for taking the time to share your experience.

Answer 1

Hi Mark; I don't have a way to provide a specific date code for the Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel #KE42EV. However, we do sell a lot of tires so they typically don't sit on the shelf for a…

view full answer...

Answer 2

Hey Tyler, I'm glad everyone was ok with the blowout and nothing serious happened, and to answer your question yes, you can go to 185/80-13 tires as they're just a bit larger than 175/80-13 tires. As for the right one, despite popular…

view full answer...

Answer 3

Hey Blake, The only difference between the Kenda tires #KE68KV and #AM10208 is the tread quality. The #AM10208 is their premium tire with a smart tread design with enhanced performance overall. While the #KE68KV is their mid-grade thread option. Both…

view full answer...

Answer 4

Hey Tracy, we have the exact bearing kit you need for your Lippert 5,100 lb axle with the part #BK3-300. Did you have a bearing problem or are you wanting to have a backup set on hand?

view full answer...

Answer 5

Hi Craig; thank you for providing those part numbers. That is the 2.25" inner diameter grease seal so for replacement bearings you can use the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal #BK3-300 you were looking at. If you prefer Timken…

view full answer...

Answer 6

Hey Mike! The Advent Air RV Air Conditioner #ADV74QR is only designed to work with an R32 setup. Your old unit is going to be R410A, so the old components won't be compatible. Since everything moved to R32 last year due to EPA regulations a…

view full answer...

Answer 7

If you have standard size axles that you are installing the Electric Trailer Brake Kit #AKEBRK-7-SA on then you can choose from the following options: 5,200 lb Axle - Kit #BK3-310 (Grease Seal 2.125" ID) or Kit #BK3-300 (Grease Seal 2.250"…

view full answer...

Answer 8

Hi Jack; the drum is integrated so you have to get the full #AKHD-655-6-K to replace it. Separate hubs and drums are typically found on larger capacity axles like 10k. The studs can be replaced with #165995.

view full answer...

Answer 9

Hey Wayne, thanks for the information. However, the VIN number doesn't help me. There's no database like cars have where I can use it to look up part numbers. I checked online and it looks like your 2018 Keystone Cougar 29RES has two 5,200…

view full answer...

Answer 10

Hi Roger! I contacted Dexter with your axle information and you will need the #25580 inner bearing and #14125A outer bearing. If you want the races as well, you will need the #25520 and #14276 respectively. The seal will be the Double Lip -…

view full answer...

Answer 11

Hey John! The LCI52 part of the axle ID means you have a 5,200 lb axle. There's no way it has super special bearings so you likely need one of the following kits (the only difference is the grease seal ID size): - Bearing Kit #BK3-310…

view full answer...

Answer 12

Hey George, honestly not much really. The Timken brand like the seal part #TMK98ZR used to be associated with being made in the USA and higher quality but they aren't made in USA any longer so between that and the part #RG06-070 there's not…

view full answer...

What Is Included With The Timken Bearing Kit TMK72VR?

Product Page this Question was Asked From

Continue Researching