Do You Sell a Hardware Kit for Curt and Draw-Tite Hitches?
Updated 04/30/2026 | Published 04/27/2026 >
Products Featured in This Question
Question:
Do you sell a hardware kit for the draw-tite 75778 hitch Or Curt 13554 Hitch
asked by: Thomas C
Expert Reply:
We sure do Tom! To get a hardware kit for either the Curt 13554 or Draw-Tite 75778 hitches, you will need the Replacement Hardware Kit item # RHK.
What you will need to do is go to the item # RHK product page and on the right hand side where it says Hitch Item Number you'll want to insert either 13554 or 75778.
It looks like those hitches fit a few model years of the Infiniti FX35, FX37, FX50, and QX70. I found a bunch of installation videos that I linked below to help you get your hitch reinstalled.
Additionally, I'm not sure where you picked up your hitch but I recommend looking down into the 2" receiver if you got it off the internet. Lots of vendors like to shove the hardware inside there for shipping.
What year and model Infiniti do you have?
You can add this information, along with any other questions you have, where it says Add Comment.

Capsie
4/30/2026
I was able to use this kit to put a hitch on my wife's car and I even got the hitch from a pull apart place
Product Page this Question was Asked From
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Featured Help Information
Miscellaneous Media






Continue Researching
- Shop: Curt Weight Distribution Conical Washer Replacement Kit
- Video: Feature Review Replacement Hardware Kit for Trailer Hitches
- Q&A: Replacement Hardware Kit For Curt Hitch # 13554 On A 2009 Infiniti FX35
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Replacement Hardware Kit for Trailer Hitches
- Video: 2013 Infiniti JX35 Curt Trailer Hitch Receiver: Complete Installation
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: How To Order Replacement Hardware Kit For Curt Trailer Hitch
- Q&A: Looking For Install Hardware For Draw-Tite Hitch On 2025 Ford Maverick
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement Hardware Kit for Reese 37096 Multi-Fit Trailer Hitch Receiver
- Q&A: Bolt Size and Thread Pitch of Attachment Hardware for Draw-Tite Class III Hitch # 75471
- Q&A: Replacement Hardware Kit for a Curt Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Can You Flat Tow a 2025 GMC Yukon?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class



Jim L.
4/29/2026
I bought the replacement hardware kit after purchasing a new car. Knowing the new car took the same hitch I had the dealer remove hitch from my old car so I could install on the new car. Kit came in a few days and installed as it did originally.