What Drums, Trailer Jack, and Trailer Coupler do I Need for My 2001 Colman Destiny, Tacoma?
Updated 04/13/2026 | Published 04/07/2026
Products Featured in This Question
Question:
There are a couple things I need help with. I trying to see which drums and hub kit to use for my camper and also for Hitch coupler to get mine is worn bad and which trailer jack. thanks I have a 2001 Colman Destiny, Tacoma
asked by: Timothy J
Expert Reply:
Hello Timothy,
Happy to help you get your Coleman set up safely and towing solid again.
A worn coupler or the wrong hub and drum setup can lead to a loose, shaky tow, which can cause extra wear and make trips stressful. Getting the right parts in place will tighten everything up, eliminate that looseness, and give you a much more stable and confident towing experience.
For your 2001 Coleman Destiny Tacoma, most of these came with either a 2,000 pound or 2,200 pound axle and a 1 inch straight spindle. Since there is not a reliable database for exact specs, I do recommend confirming a couple things. Check the axle tag for the weight rating and verify your bolt pattern. The most common bolt pattern is 5 on 4 1/2 inches.
Once you confirm those two details, you can move forward confidently with the Dexter Trailer Idler Hub Assembly part number # 8-258-5UC1-EZ. This fits 2,000 to 2,200 pound E-Z Lube axles with a 1 inch spindle and the common 5 on 4 1/2 inch bolt pattern.
For the coupler, most of these trailers use an A frame with a 2 inch ball. Since yours is worn, replacing it will make a big difference in how tight and secure your connection feels. The Demco eZ Latch A Frame Coupler part number # DM14793-81 is a great option and helps ensure you have a solid latch every time without the guesswork.
For the trailer jack, you have a couple really good options depending on what you prefer. If you want something effortless, the etrailer Electric Trailer Jack with Foot Plate part number # e64GV is a great choice. It gives you 14 inches of lift and makes hitching and leveling much easier with the push of a button.
If you would rather go with a manual option, the Lippert A Frame Trailer Jack part number # LC285420 is a solid, reliable choice with 15 inches of lift and a sidewind handle. If you go this route, I do recommend adding a foot plate like part number # JF-99 for better stability on softer ground.
Your next step is simple. Measure your spindle and confirm your bolt pattern. Once those match up, you can order these parts knowing they will fit and work together properly.
Also, where do you usually take your Coleman, mostly paved campgrounds or rougher spots? That can help fine tune which jack setup will give you the best stability and ease of use for how you camp.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Q&A: Replacing Dexter Idler Hub 008-258-05 with Hub and Drum Assembly # 8-257-5UC3
- Q&A: How Tight Should the Lug Nuts of the Trailer Hub Assembly # 8-258-5UC1 be Tightened
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer jack
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer lights
on Trailer Hubs and Drums
