Torklift Camper Tie Downs For 2020 GMC 3500 Crew Cab 4WD Single Rear Wheel

Question

Question:

Your website does not allow me to choose the 8 foot bed option to find the torklift front/back for a 2020 gmc crew cab 4wd single rear wheel. When I look on the torklift site it says the fronts are tlc2226. I can not seem to find the front and back kit.

asked by: Jess D

0

Expert Reply:

Hey Jess, cool name! We do have the Torklift Camper Tie Downs for your 2020 GMC 3500 Crew Cab 4WD SRW. You are right about the C2226 being correct for the front, then you'll need C3221 for the rear. We have these avfaialble as a kit that comes with both the front and rear, and for that you will need the following:

- TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL67DR

Keep in mind the turnbuckles are sold separately, and for that I recommend the following:

- TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Gray - Qty 4 # TLS9522-2-LK

What kind of camper do you have?

expert reply by: Jesse M

0

TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Gray - Qty 4
(click to enlarge)

Ron

3/4/2026

I would definitely recommend this item, fantastic product

Jesse M.

3/5/2026

@Ron Appreciate the recommendation, Ron. Thanks for sharing!

Bob

3/4/2026

I have had several truck campers over the years. I like the TorkLift tie downs better than any of the other makes I’ve used. My truck is a long bed extended cab 1 ton GMC. They are easy to install, unobtrusive, can be removed easily from the brackets installed on your frame. The FastGun turnbuckles are easily adjustable, and very secure. Definitely recommend.

Jesse M.

3/5/2026

@Bob Thanks for the feedback, Bob! Glad to hear the Torklift tie down system has been working so well for you. Its definitely the most solid setup on the market!

Answer 1

Hey John! If you have the factory hitch or SuperHitch Magnum, and no running boards/cab length running boards, you need the TorkLift Tie Downs #TL67DR. If you have a non-Torklift aftermarket hitch you need #TL64QV instead. If you have a dually, or…

view full answer...

Answer 2

Hey Tom! I can definitely help you out so you can hit the road again. The best option for tie-downs on your Silverado is the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL67DR. If you don't already have them you will also need…

view full answer...

Answer 3

Hello Gary, thanks for reaching out. I can definitely make sure you get the right tie downs for your truck. I will need to know a bit more about your truck before we move on. First, is your truck single rear wheel or a dually? Second, do you have any…

view full answer...

Answer 4

Hey Todd, In the attached video below you can see Ryan installing the front tie-downs from the TorkLift Tie Downs #TL67DR on a 2024 3500 model with electric fold-out steps with no problem. The #TL67DR includes both the front and rear assemblies with…

view full answer...

Answer 5

Hey Todd, thanks for reaching out! The TorkLift Tie Downs #TL67DR is the standard design while the TorkLift Tie Downs #TL44PR is the same thing, just upgraded to aluminum for better corrosion resistance.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Torklift Camper Tie Downs For 2020 GMC 3500 Crew Cab 4WD Single Rear Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching