Camper Tie-Downs for 2026 Chevy Silverado 3500 Long Bed With Factory Hitch

Question

Question:

I'm looking for tie downs for my new 2026 Silverado 3500 so I can get my camper back in the truck and hit the road. Long bed, I don't have running boards, came with a hitch. Can you please help me out here? Thanks! -Tom

asked by: Tom

0

Expert Reply:

Hey Tom! I can definitely help you out so you can hit the road again. The best option for tie-downs on your Silverado is the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL67DR. If you don't already have them you will also need turnbuckles like the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK.

Where are you headed once you get your camper installed in your truck?

expert reply by: Robin H

0

TorkLift Tie Downs
(click to enlarge)

Tom

11/25/2025

Headed out West for some winter camping. This is exactly what I was looking for, thank you very much.

Robin H.

11/25/2025

@Tom you're very welcome, have a safe trip!

Answer 1

Hey John! If you have the factory hitch or SuperHitch Magnum, and no running boards/cab length running boards, you need the TorkLift Tie Downs #TL67DR. If you have a non-Torklift aftermarket hitch you need #TL64QV instead. If you have a dually, or…

view full answer...

Answer 2

Hey Jess, cool name! We do have the Torklift Camper Tie Downs for your 2020 GMC 3500 Crew Cab 4WD SRW. You are right about the C2226 being correct for the front, then you'll need C3221 for the rear. We have these avfaialble as a kit that comes…

view full answer...

Answer 3

Hello Gary, thanks for reaching out. I can definitely make sure you get the right tie downs for your truck. I will need to know a bit more about your truck before we move on. First, is your truck single rear wheel or a dually? Second, do you have any…

view full answer...

Answer 4

Hey Todd, thanks for reaching out! The TorkLift Tie Downs #TL67DR is the standard design while the TorkLift Tie Downs #TL44PR is the same thing, just upgraded to aluminum for better corrosion resistance.

view full answer...

Answer 5

Hey Todd, In the attached video below you can see Ryan installing the front tie-downs from the TorkLift Tie Downs #TL67DR on a 2024 3500 model with electric fold-out steps with no problem. The #TL67DR includes both the front and rear assemblies with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Camper Tie-Downs for 2026 Chevy Silverado 3500 Long Bed With Factory Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching