TorkLift Camper Tie Downs For 2020 GMC 3500 Long Bed 4WD

Question

Question:

I have a 2020 GMC 1 ton long bed four-wheel-drive and I am trying to decide which one fits my truck the best

asked by: Gary

0

Expert Reply:

Hello Gary, thanks for reaching out. I can definitely make sure you get the right tie downs for your truck. I will need to know a bit more about your truck before we move on.

First, is your truck single rear wheel or a dually?

Second, do you have any running boards or steps under the cab? If yes, do they run wheel-to-wheel, or are they cab length only?

Lastly, is your rear trailer hitch factory or aftermarket?

Answer those questions for me, and I can make absolutely sure you get the right thing.

For example, the TorkLift Tie Downs # TL67DR fit long bed trucks with single rear wheels, no running boards or cab length only running boards and a factory trailer hitch. If this does not describe your truck let me know.

Also keep in mind the turnbuckles are sold separately, and for that I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK.

expert reply by: Jesse M

0

TorkLift Tie Downs - Custom Frame Mount - Front and Rear
(click to enlarge)

Gary

11/12/2025

It is a single axle. Also, it has the factory hitch. And the running boards are Cab length.

Jesse M.

11/13/2025

@Gary Ok perfect! The # TL67DR I mentioned above will be exactly what you need then! That comes with both the front and rear tie downs.

Gary

11/13/2025

@JesseM Can you tell me if C2213 / C 2220 would fit my truck

Jesse M.

11/13/2025

@Gary I do not show those as fitting a 2020 GMC 3500. The # TL67DR I mentioned comes with C2226 and C3221.

See All (7) Replies to Gary ∨

Answer 1

Hey John! If you have the factory hitch or SuperHitch Magnum, and no running boards/cab length running boards, you need the TorkLift Tie Downs #TL67DR. If you have a non-Torklift aftermarket hitch you need #TL64QV instead. If you have a dually, or…

view full answer...

Answer 2

To add a 7-Way connector to the bed of your 2024 Chevy Silverado 2500, I recommend the Draw-Tite 5th Wheel/Gooseneck Wiring Harness item #20110. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your…

view full answer...

Answer 3

Hey Tim, we do have a set of Happijac camper tie downs that fit your 2019 GMC Sierra 3500 with the part #LC350763-182971. Do you need turnbuckles too?

view full answer...

Answer 4

Hey Jess, cool name! We do have the Torklift Camper Tie Downs for your 2020 GMC 3500 Crew Cab 4WD SRW. You are right about the C2226 being correct for the front, then you'll need C3221 for the rear. We have these avfaialble as a kit that comes…

view full answer...

Answer 5

Hey Tom! I can definitely help you out so you can hit the road again. The best option for tie-downs on your Silverado is the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL67DR. If you don't already have them you will also need…

view full answer...

Answer 6

Hey Todd, thanks for reaching out! The TorkLift Tie Downs #TL67DR is the standard design while the TorkLift Tie Downs #TL44PR is the same thing, just upgraded to aluminum for better corrosion resistance.

view full answer...

Answer 7

Hey Todd, In the attached video below you can see Ryan installing the front tie-downs from the TorkLift Tie Downs #TL67DR on a 2024 3500 model with electric fold-out steps with no problem. The #TL67DR includes both the front and rear assemblies with…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

TorkLift Camper Tie Downs For 2020 GMC 3500 Long Bed 4WD

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching