Locating Correct Grease Seal for 7K Dexter Hubs on Alliance Valor

Updated 02/20/2026 | Published 02/15/2026

Question:

i have an alliance valor 40v13 it has dexter axles dex9506644 hf=92.5, sc=74.5 as seen on tag, i am looking for the grease seals on the hubs. i am looking at maintenance on wheel bears and would like to replace back seals at that time. without taking them off is wondered if ya knew part number so i could have them on hand before starting work

asked by: bryan h

Expert Reply:

Hey Bryan!

I definitely understand not wanting to pull a hub to find the right seal size. It's not the most fun (nor cleanest) job in the world.

Without actually doing that and verifying the right size, I can give you an answer that's about 85% sure. MOST likely, with the Dexter 7K axles on your Alliance Valor and the (from what I could tell) 8 lug hubs, the right grease seal is going to be part # GS-2250DL. This one has a 2.250" inner diameter and a 3.376" outer diameter.

I'm sorry I can't give you the full 100% confident answer, but there's a decent chance this is the right one. If you happen to pull your hubs and find different measurements, just let me know and I can get you the right one.

What trip are you getting the Valor ready for?

expert reply by: Chris R

Bryan H.

2/19/2026

wow now I am really confused. Chris, I just hung up with you on the phone before getting your email and you pointed me to the RG06-070 unfortunately, I just ordered the 070 can I get this order stopped or could the 070 also be right?