Checking Out the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches Video

Hey Eric, we do have to recommend you stick with what Kuat recommends when using their bike racks so that you don't void any warranties. But with that said I am sure people have used hitch extenders like the RockyMounts part #RKY10011 in…

Hey James, thanks for reaching out. For the Benton LittleShift Bike Rack #B54VR the pin should be inserted until the "shoulder" of the bolt is flush up against the side of the hitch. I've included a few pictures to help illustrate. If…

It will depend a little bit on the design of the individual truck, however the tilt-away feature of the Thule T2 Pro Xbike rack, part #TH83GC gives it quite a bit of range away from most vehicles but I can't guarantee it will clear your tailgate.…

Hey Bryan! I definitely understand not wanting to pull a hub to find the right seal size. It's not the most fun (nor cleanest) job in the world. Without actually doing that and verifying the right size, I can give you an answer that's about…

The shortest 2 inch hitch extender we have is the part #HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey William, congrats on your new bike rack. To use the 1-1/4" Yakima StageTwo Bike Rack with a 2" hitch, I recommend the Trailer Hitch Reducer 2" to 1-1/4" item #e63YR. This reducer sleeve will insert directly into your 2"…

The 3 trailer hitches with the most hidden receivers for your 2019 Ford Escape are the Curt #C13186, the Draw-Tite #75782, and the etrailer.com #e98866. Since they all have the same profile it really boils down to what style suits you best. If you…

You can go ahead and direct the photos to me simply by responding to this email. If you could include any potentially relevant measurements I would appreciate that as well.

Hey Hatish! The best way to mount a transmission cooler like the Derale Series 8000 Plate-Fin Transmission Cooler Kit #D13504 is right side up or sideways. If the barbs are up or out to the side you're good. The other important thing to consider…

It sounds like you are looking for the Dexstar Steel Mini Mod Trailer Wheel part #AM20436 which matches all the specs in the photo you attached. The manufacturers part number for this wheel is also 017-231.