Replacement Hub, Bearings, and Brake Assembly for AL-KO 6k Axle
Updated 10/30/2025 | Published 02/21/2025
Products Featured in This Question
Question:
What hub, bearings brake assembly. and seal to use on a AL-KO 6K 8 lug axle with a 16 inch rims and 1/2 inch lug nuts? It is a 2007 Dump trailer. Verifying my choice. Thanks
asked by: William W
Expert Reply:
Hi William; to find these replacement parts you will need more information on the axle since it is an AL-KO, specifically the bearings and brake flange. AL-KO is no longer around and some of their parts don't follow industry standards. If you have a # 14125A outer and # 25580 inner bearing with a grease seal that has a 2.25" inner diameter you can use the # 42866UC3-EZ for a replacement.
For the brakes, if you have a standard 5-bolt brake flange you can use the # AKEBRK-7-SA. If you have the old AL-KO 4-bolt you would need the Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles # 23-105-106-09. If you have a different bearing combination let me know in the comments below and I'll see what we have for a replacement.
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Q&A: Replacement Hub for a AL-KO 8460
- Search Results: bd2~655
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Search Results: axletek bd2 655
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer jack
- Search Results: trailer leaf springs
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Trailer Brakes
Robin H.
10/30/2025
Hi William, were you able to confirm which bearings and brake flange your AL-KO axle uses? Knowing what you found could really help others trying to match parts on older AL-KO setups.