Best 2" Hitch Receiver For 2018 Lexus RX 350 F Sport

Question

Question:

Can you please let me know which 2 inch hitch would fit on a 2018 Lexus RX 350 sport

asked by: Gordana M

0

Expert Reply:

Hello Gordana, thanks for reaching out.

For your 2018 Lexus RX 350 F Sport, the correct 2-inch hitch is the following:

- Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" # 391LXRX16

This hitch is a clean, vehicle-specific fit and uses a removable 2-inch receiver, so when it’s not in use you won’t see anything hanging below the bumper. It bolts on without major modifications, and only the receiver is visible when installed.

The rack receiver is rated for 350 lbs of tongue weight, which makes it a great option for bike racks and cargo carriers. If you plan to tow a small trailer, you will also need the Stealth towing kit # SH36GR which adds the ball mount attachment and wiring.

What are you mainly planning to use the hitch for, bikes, a cargo carrier, or light towing?

expert reply by: Jesse M

0

Stealth Hitches Hidden Rack Receiver - Custom Fit - 2"
(click to enlarge)

Scott H.

2/4/2026

very easy to install, purchased March2025 - use all the time for my bike rack

Answer 1

I would be happy to clarify! At one point in time the Curt Trailer Hitch Receiver #C13272 you were looking at was confirmed to fit the F-Sports, but after some fitment issues due to certain sub models of the F-sport we took it down as a confirmed…

view full answer...

Answer 2

We do have a hitch that will fit your 2022 Lexus RX 350 with the Curt #C73DR. This hitch will still allow you to use your liftgate sensor, but you will need to kick to either side of the receiver as opposed to just swiping your foot under the bumper.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Best 2" Hitch Receiver For 2018 Lexus RX 350 F Sport

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching