Replacement Bracket for Thin Line Trailer Clearance and Side Marker Lights MCL67ABCB

Question

Question:

Hi need part number for mounting bracket for marker lights MCL67ABCB

asked by: Rob B

0

Expert Reply:

Hey Rob, welcome back! The Optronics item # A67CB is the replacement mounting bracket of the Optronics ThinLine Clearance or Side Marker Light item # MCL67ABCB.

What kind of trailer do you have?

expert reply by: Jerred H

0

A67CB
(click to enlarge)

Jerred H.

2/10/2026

Hey Rob, did the chrome bracket and plug work well with your ThinLine marker lights? Your update could make it easier for others trying to match the same setup.

Answer 1

Hello John, thanks for reaching out. The Optronics ThinLine Clearance or Side Marker Light #MCL67ABCB is 4-1/8" long overall. I have attached a picture that shows the exact dimensions. What trailer are you fitting this light on?

view full answer...

Answer 2

I have some great LED replacement options for your 2006 ShoreLand'r Trailer with Alumacraft Boat. I have attched a list of these below. Please note, they may not all be exact fit replacements but with a bit of work they will be able to be made…

view full answer...

Answer 3

I wasn't able to find anything based on the part number you listed. Do you happen to have a picture of the light cluster? A lot of times with that I can find what you'd need.

view full answer...

Answer 4

To order replacement lens for your Shorelander boat trailer, you will want to try and locate a part number on the light housing or take a quick measurement of the light and order by size. I have included a link to all of our tail light replacement…

view full answer...

Answer 5

I found your order notes and it looks like you bought the Optronics light bar part #MCL97RB which is actually a single function light. It only would have the running light circuit ran to it.

view full answer...

Answer 6

If you are considering making changes to the lighting on your trailer you may want to refer to the linked article that covers trailer lighting requirements. The required number, type and placement of trailer lights/reflectors varies based on the…

view full answer...

Answer 7

In order to find a replacement side marker light for your 2015 Dynamax Dynaquest I recommend taking some measurements of the current light. There is not a direct replacement available so you will need to find something that is a close match and…

view full answer...

Answer 8

Thanks for the photo, that really helps to narrow it down! For incandescent replacements you need these Optronics Lights: - Driver Side #ST57RS - Passenger Side #ST56RS Then for LED replacements you need these Optronics Lights: - Driver Side #STL57RB…

view full answer...

Answer 9

The Optronics Tall Rectangle Submersible LED Trailer Tail Light, part #STL56RB, should work on your Shoreland'r trailer. The same light for the left side of the trailer is the Optronics Submersible LED Trailer Tail Light, part #STL57RB. We have…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Bracket for Thin Line Trailer Clearance and Side Marker Lights MCL67ABCB

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching