Will Inno Shaper 100 Roof Cargo Basket Fit 2023 Tesla Model Y

Question

Question:

Will Inno shaper 100 work with Tesla model y?

asked by: Andrew T

0

Expert Reply:

Hello Andrew; you will have to check a few things to see if the Inno Shaper 100 Roof Cargo Basket # INXA569 will fit your 2023 Tesla Model Y. It fits in the top channels of your crossbars, so if you have channels on top it will probably work. See the picture below which shows the channel measurements. You also need a minimum crossbar spread of 20". If you meet these requirements it will fit your roof rack.

What will you be using the cargo basket for?

expert reply by: Robin H

0

Inno Shaper 100 Fitment
(click to enlarge)

Robin H.

1/27/2026

Hey Andrew, did the Inno Shaper 100 end up fitting your Tesla Model Y once you checked the crossbar channels and spread? Knowing how it worked out could help others trying the same setup.

Andrew T.

1/30/2026

@RobinH Ended up getting the Yakima off grid in medium. Based one of the comments with photos with the model 3 I figured it would run into the same issue and require a bunch of spacers to work, which I was not willing to do.

Answer 1

Hey Judy, I believe you are referring to the end cap on a crossbar, which is the bar that the Thule Hullavator attaches to on your roof. Does that sound right? If you can send a picture to this email ([email protected]) I can verify which…

view full answer...

Answer 2

Hi Elliott! The Inno Shaper 80 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 32-1/2" #INXA568 will definitely fit on your 2016 Honda CR-V. It fits a crossbar spread of 20" to 35", so with you having 31", you are…

view full answer...

Answer 3

Most roof top tent companies will say that as long as the roof and roof rack has a dynamic weight capacity of at least 165 lbs it would have the static capacity for a roof top tent with occupants. The reason they say this is because it seems to be…

view full answer...

Answer 4

Hello Megan, thanks for reaching out. The SportRack Horizon Rooftop Cargo Box #SR7016 will be a fit for your 2014 Honda CR-V, as long as your CR-V is equipped with a roof rack with crossbars. The box sits on top of the crossbars, so if you already…

view full answer...

Answer 5

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Inno Shaper 100 Roof Cargo Basket Fit 2023 Tesla Model Y

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching