Will Curt RVi Series TBC+ Connect to Command Center Tablet

Updated 01/27/2026 | Published 12/31/2025

Question:

Does this generation of the TBC+ connect to the Rvibrake tablet? I have an Rvibrake3 with the command center hub and tablet screen. My older TBC+ is not working now but when it did, the charge voltages and charge current were displayed on the tablet screen. If I purchase this new TBC+ version, I wanted to determine if I will be able to view the voltages and current on my existing tablet screen.

asked by: Chris G

Expert Reply:

Hey Chris! Yes, the Curt RVi Series Towed Battery Charger+ for Flat Towing # RVI74FR will connect to your command center and tablet just like the old one. You can see this in the picture from the instructions below. I also attached a link to the instructions with all the steps further down on this page.

Any big trips coming up with your motorhome?

expert reply by: Robin H

TBC+ Pairing
(click to enlarge)

Robin H.

1/27/2026

Hey Chris, how did the new TBC+ work with your RVi command center and tablet? Were you able to see the voltage and current readings like before? Your update could make it easier for others using the same setup.

Chris G.

1/27/2026

@RobinH Sorry, I did not purchase a new TBC+. I fixed a loose connection on the old unit and it is working now. Though I did find instructions for the new Curt TBC+ online and it no longer references the Rvibrake tablet. So, my questions is still open, does the Curt TBC+ connect to the Rvibrake tablet to display voltage and current. Personally I do not need the answer at this time, but as you mentioned, someone else may in the future. Thank you for following up.

Robin H.

1/27/2026

@ChrisG it can connect to the tablet but you are correct, it doesn't have to connect to function properly. It can also connect to the new Bullseye Monitor # RVI64FR but again, it doesn't have to.