Can The Head On The etrailer Electric Trailer Jack e79GV Be Rotated For Tailgate Clearance?

Question

Question:

Can the power head be rotated for tailgate clearance?

asked by: Tye

0

Expert Reply:

Hi Tye!

The head on the etrailer Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs # e79GV is fixed, but all is not lost. Pretty much all A-Frame jacks, including this one, use a 3" on center bolt pattern.

So with that said, you can rotate the entire jack at the time of the install to where your tailgate will open without contacting it. The LED light won't be facing forward, but it will still give you some light to get all coupled together. Not the end of the world, but figured I should mention it.

What kind of trailer are you wanting to install this on?

expert reply by: Lazer S

0

A-Frame Jack Mounting Plate
(click to enlarge)

Answer 1

Hey Jason, thanks for reaching out. Looking over all the jacks you mentioned, I believe the etrailer Electric Trailer Jack #e79GV will best suit your needs. The capacity is 3,500 lbs and it has the drop leg. It has an LED light and an emergency…

view full answer...

Answer 2

Hey Mark, the height of the etrailer Electric Trailer Jack #e23ZV that you referenced above the mounting plate is 20 inches. This is about the shortest dimension you'll get from a jack like this. Would that be enough clearance?

view full answer...

Answer 3

No worries Lorelei, I'm here to help! An electric jack is more of an upright only jack, whereas the manual options can have the ability to swivel to the stowed/concealed position for storage. Do you know if you have the mounting hole cutout…

view full answer...

Answer 4

Hi Jeff; are you asking how far back the head of the Trailer Valet Electric Tongue Jack with Digital Tongue Weight Scale #TV95FR sticks out to see if it clears your propane cover? It will extend back 3.68" from the leg. I attached some diagrams…

view full answer...

Answer 5

Yes, there is Brad. You'll want to use the 18" Long Equal-i-zer Weight Dist Shank item #EQ90-02-4600. This shank is 6" longer than most of the standard ones you see included with weight distribution systems. It has the same 1-1/4"…

view full answer...

Answer 6

Porpoising (bouncing like you described) and sway are both commonly caused by the same thing when towing and that is not enough tongue weight for the trailer relative to the total amount of weight the trailer weighs. You need the tongue weight to be…

view full answer...

Answer 7

Going with a powered a-frame jack that has more than enough capacity like the Stromberg Carlson Electric Trailer Item #JET-5000 will benefit you in that the jack will raise and lower quickly without any strain. The capacity of your your jack is based…

view full answer...

Answer 8

The etrailer jack part #EJ-3520-BBX has a height of 20-1/2 inches from the mounting bracket to the top of the jack. Which from everything I looked up appears to be the shortest overall height from bracket to top of jack.

view full answer...

Answer 9

Hello Ralph, thanks for reaching out. The etrailer Electric Trailer Jack #e23ZV will be a great option for you. The jack can be rotated to the side if needed. We have one of these jacks on our trailer here at the shop and I have seen it rotated and…

view full answer...

Answer 10

A 100 amp hour battery would suffice for powering a trailer tongue jack as well as some other accessories. For this, we have both AGM such as the Bright Way Deep Cycle RV or Marine Battery part #BRW94FR. In order to charge these batteries, you'd…

view full answer...

Answer 11

I would recommend 10 gauge wire like our part #10-1-1 (sold by the foot) for wiring up a powered jack motor.

view full answer...

Answer 12

There isn't an easy way to rotate just the head on an A-frame trailer jack such as #LC285318 or your 1817941. What you can do is rotate the entire jack and bolt it back down. This will result in a greater than 90 degree rotation but is the only…

view full answer...

Can The Head On The etrailer Electric Trailer Jack e79GV Be Rotated For Tailgate Clearance?

Product Page this Question was Asked From

Continue Researching