Is there an Extended Weight Distribution System for Better Turning Clearance?

Updated 01/05/2026 | Published 08/09/2025

Products Featured in This Question

Curt Hitch Extender for 2" Hitch Receivers - 8" Long

(672)

$52.35

Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW

(498)

$175.42

Question:

Is there a way to extend a weight distribution hitch to allow for greater clearance with tight turns? Or a WDH that is built with longer shank?

asked by: Brad

Expert Reply:

Yes, there is Brad. You'll want to use the 18" Long Equal-i-zer Weight Dist Shank item # EQ90-02-4600. This shank is 6" longer than most of the standard ones you see included with weight distribution systems. It has the same 1-1/4" spacing between adjustment pin holes so it's pretty universal.

What is your trailer's loaded weight and do you already have a weight distribution hitch?

expert reply by: Jerred H

Extended Shank
(click to enlarge)

Brad

8/9/2025

Yes, I have a Curt WDH with round bars + chain system. Can the 18” Equilizer device be installed into my Curt, switching the original shorter shank out?

Jerred H.

8/9/2025

@Brad Yes, the Equal-i-zer Weight Dist Shank item # EQ90-02-4600 is compatible with Curt weight distribution hitches like item # C17051.

Brad

9/8/2025

@JerredH Hi- I am just getting back to this project. My Loaded trailer weight is at most #4000. Will this be OK with the extended shank? Thanks again. Brad