Do Brophy Camper Tie Downs HSAB Fit 2024 Ram 3500

Question

Question:

Hi, can I use this Brophy Tie-Downs on a 2024 Dodge RAM 3500 Dually with a Northern Lite 10 Truck Camper? Please see also the pictures attached. I am not sure is this a -in bed liner? I am Swiss and I am not familiar with Pickup trucks. Happy day, Thomas

asked by: Thomas

0

Ram Truck Bed Liner
(click to enlarge)

Expert Reply:

Hey Thomas, the Brophy camper tie downs part # HSAB are a fit for your 2024 Ram 3500 and are compatible with the spray in bed liner that your truck has. You definitely do not have a drop in bed liner like what these are not designed to fit.

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hi Thomas, how did the Brophy tie-downs work out on your Ram 3500 with the Northern Lite camper? It would be great to hear how the fit turned out with your spray-in bed liner. Your update could make it easier for others setting up a similar truck and camper combo.

Thomas

12/29/2025

@JamesonC Hi Jameson, Thank you for coming up with the Brophy topic. To be honest - I have bought the Torklift tie downs because they seemed to me the better solution. I think the Brophy is a good concept but the material of the truck is to thin so I am afraid about damage the truck. English is not my mother tongue I hope I could explain what I mean. ?? Take care, Thomas

Jameson C.

12/29/2025

@Thomas I understand what you are saying and I agree the Torklift tie downs are the better solution.

Answer 1

The HappiJac Manual Truck Camper Jack System, #LC736515-4 has a shipping weight listed from the manufacturer of 119 lbs. with a portion of that weight obviously being packaging material.

view full answer...

Answer 2

The RoadActive Suspension #RAS4612 hasn't been tested on your 2000 Ford F-150 with added leafs to the rear suspension. There's a chance it might work, but there's also a large chance you'd have to remove the added leafs to be able to…

view full answer...

Answer 3

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 4

To install the Replacement Anchor Bolt for HappiJac Truck #LC182852 for the HappiJac Truck-Mounted Camper Tie-Downs #LC182861 follow the instructions below and use the reference picture attached: 1. You'll start by marking a center point from…

view full answer...

Answer 5

The Everchill RV Refrigerator w/ Freezer #324-000119 is designed to work off of 12v DC power so that you can go off grid and run off of your batteries instead of needing shore power. Typically if someone was off-gridding we recommend adding up the…

view full answer...

Answer 6

In regards to trailer suspension, it's always best to swap parts with identical replacements when doing any work so you don't run into issues like you're having now with components binding or making contact. That said, I do understand…

view full answer...

Answer 7

Mark, the Dexter EZ Flex part #K71-652-00 can be used to replace your #TREQ310 and is cushioned like you are wanting. The 25-1/4 inch leaf spring size is very common but you didn't mention what axle capacity you have so if you needed a 5k spring…

view full answer...

Answer 8

Excellent question, and the difference between the two kits comes down to the dimensions of the equalizers. What you will want to do is match up the size of your equalizer with the size of the equalizer in these kits. - 6" Long, 4" Tall…

view full answer...

Answer 9

The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Do Brophy Camper Tie Downs HSAB Fit 2024 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching