Is TowSmart Trailer Hitch Receiver Easy To Install Myself On 2025 Honda CR-V Or Is Dealership Needed

Question

Question:

Is this something I could install myself on my 2025 Honda CR-V Touring, or should I have a shop do it? I don't' want the dealer to do it since it will be too much money . thank you, laura

asked by: Laura

0

Expert Reply:

You could definitely handle it if you’re comfortable with basic tools or have a helper, Laura. The TowSmart # TS67ZR install is all bolt-on - no welding or drilling. You’ll lower the exhaust, fishwire bolts through the frame holes, and torque everything to spec around 70–75 ft-lbs.

Most DIYers get it done in about an hour with a floor jack or set of ramps, but a lift is certainly easier.

If you’re planning to tow, add the T-One Wiring Harness # 118741 for your trailer lights and the Ball Mount Kit # 989891 for the hitch balls. What do you plan on using the hitch for, Laura?

expert reply by: Andrew N

0

CR-V TowSmart Hitch
(click to enlarge)

Laura

11/26/2025

Thanks Andrew! Good to know. I’ll probably give it a shot this weekend. I’ve got ramps and a decent tool kit, so I should be ok. Appreciate the help!

Andrew N.

11/26/2025

@Laura Happy to help! Ramps make the whole job way easier; just take your time with the fishwiring step and keep a hand on the bolts so they don’t slip back into the frame. If you hit any snags, feel free to pop back in with a question. Can’t wait to hear how it goes!

Answer 1

Hey Michael, we have the Draw Tite hitch part #76128 that fits your 2024 Honda CR-V that doesn't require any fascia trimming. This also is the 2 inch hitch size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Is TowSmart Trailer Hitch Receiver Easy To Install Myself On 2025 Honda CR-V Or Is Dealership Needed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching