Looking for 25-1/4 inch Leaf Springs for 2008 Ice Castle

Question

Question:

Hey,Im looking for leaf springs for my 2008 Ice Castle,. 2 wide springs, 25 1/4 between eye let, 4 leaves! Thanks

asked by: Dale L

0

Expert Reply:

Hey Dale, do you happen to know axle capacity you need? That's a very popular leaf spring length that we have springs for axles that range from 3k to 7k. Most popular is 3,500 lb axle like the part # DX23CR but I attached a link to all of the springs we carry that are this length.

expert reply by: Jameson C

0

Dale G.

11/19/2025

I think ,I know that you are to late! Traveled 3hr one way to get them yesterday! Regards

Jameson C.

11/19/2025

@DaleG sorry for the delay! We are pretty far behind right now unfortunately. What capacity spring did you end up getting?

Answer 1

Trailer hubs have two bearings, one is referred to as the inner bearing, closer to the trailer. The outer bearing is the one furthest from the trailer. If we have both of these bearing numbers we can identify which spindle or hub is needed. So far…

view full answer...

Answer 2

Hey Adam, 24-5/8" is a standard sizing for 2,000lb leaf springs so the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long #e69SR is what you need. It unfortunately doesn't look like we offer a slipper spring…

view full answer...

Answer 3

Hello Ryan, thanks for reaching out. Yes axle U-bolts are not meant to be re used so you will definitely want to replace them. For a 3,500 lb 2-3/8" diameter axle, the longest we carry are the 5-1/2" U-bolts like what come with the #APUBR-1…

view full answer...

Answer 4

Hey Matt, thanks for reaching out. You are definitely on the right track here. The Bearing Kit #BK2-100 is exactly what you need for your Dexter 3,500 lb axles. Then for the U-bolts, the CE Smith U-Bolt Kit #CE23002. The Dexter Heavy-Duty Suspension…

view full answer...

Answer 5

Hi Jeff; there are a lot of different leaf spring lengths out there, and axle spacing/hanger measurements can only help you guess what the original length was. The "D" measurement isn't really the best way to find a replacement either.…

view full answer...

Answer 6

Hey Eli! The first thing you want to do is make sure you have brake flanges on those axles. You also need to take a look at the axle tags and find the axle capacity. More than likely they're 3,500 lb axles so I'll answer based on that. If you…

view full answer...

Answer 7

Hey Dennis, thanks for reaching out! The 4-Leaf Double-Eye Spring #DX23CR has a 3" drop from center eye to middle of the leaf spring (see attached photo). For a single axle setup I recommend the Hanger Kit #APS4, and for a tandem axle setup I…

view full answer...

Answer 8

Hello Monte, thanks for reaching out. Both of the springs you mentioned, the etrailer #e54SR and Dexter #DX23CR are springs for a 3,500 lb axle. The difference is the brand and the length. The #e54SR is our etrailer brand and is 25-1/8" long eye…

view full answer...

Answer 9

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Looking for 25-1/4 inch Leaf Springs for 2008 Ice Castle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching