Replacement Landing Gear for 2005 Jayco Designer
Updated 11/12/2025 | Published 11/11/2025
Products Featured in This Question
Question:
I looking for a landing leg kit for my 2005 Jayco Designer .Bracket measurement is top of upper bracket to bottom of lower bracket is 21 1/2 inside measurement is 17 1/2 overall leg is 37
asked by: Terry S
Expert Reply:
Hello again Terry; I would double check your measurements there. The difference between the inside and outside measurement is typically 2", with 1" for the weld stops. We have the Stromberg Carlson Electric Landing Gear Set # LG-4 which has an inside measurement of 19-1/2" and outside of 21-1/2" with lines up with one of your measurements.
All of the others like the # RVLG-8HDL we talked about before follow the industry standard and are 15-1/2" inside and 17-1/2" outside. If nothing lines up correctly the only option would be to weld on new brackets # LC113511 to match.
(click to enlarge)
Product Page this Question was Asked From
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 7001 - 8000 lbs
- Manual Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 5th wheel front landing gear
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Q&A: Replacement Follow Landing Gear Leg for 1998 Fleetwood Savanna 5th Wheel
- Q&A: Replacement Landing Gear For A 2008 Weekend Warrior Road Warrior 5th Wheel Toy Hauler
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Shop: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies
- Shop: Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
- Q&A: What Replacement Lead Leg Do I Need for My 2011 Keystone Montana Trailer?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Fifth Wheel Towing Made Simple with Daniel
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Shop: Trailer Wiring
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: trailer tires and wheels
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: Should I Get Loadlifter 5000 Or 7500 For Towing A 15K Fifth Wheel
- Search Results: trailer jack
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
on Camper Jacks
Terry S.
11/12/2025
Hi Robin , it has 2” weld on brackets ( factory installed ) I bought this trailer new in 2005 and is in great shape, except the landing gear is worn out. Like I stated before the outer tube is 37 “.