Will Front Runner Ladder FR67DJ Fit 2025 6th Gen Toyota 4Runner Trailhunter?

Question

Question:

Will this ladder fit the 2025 6th Gen Toyota 4Runner Trailhunter? Also, do you ship to Canada?

asked by: Connie N

0

Expert Reply:

Hello Connie, thanks for reaching out. The Front Runner Ladder # FR67DJ ladder is designed specifically for the 5th-generation Toyota 4Runner (2010–2024), and the 2025 Trailhunter belongs to the new 6th-generation platform. Because the tailgate shape, hinge placement, and body contours have likely changed, the ladder may not align or mount correctly on the newer model. This is not something we have specifically tested, but in all likelihood it will not work for the 6th gen.

To answer your other questions, yes, we do ship to Canada.

expert reply by: Jesse M

0

Jesse M.

12/1/2025

Hey Connie, were you able to find a ladder that fits your 2025 4Runner Trailhunter? Knowing what ended up working could help others with the new 6th-gen model.

Connie

12/24/2025

Hi, thanks for your reply. No I haven't found a ladder yet. Doesn't seem like anything is available in Canada yet for the 6th gen.

Jesse M.

12/30/2025

@Connie Ok gotcha. Hopefully it is just a matter of time before something is developed for the 6th gen. Thanks for taking the time to share!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Will Front Runner Ladder FR67DJ Fit 2025 6th Gen Toyota 4Runner Trailhunter?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching