What Bearings Do I Need for my CZ Model CZ18KT Trailer
Updated 12/01/2025 | Published 10/29/2025
Question:
Hello: We are looking for bearings and seals for a CZ Trailer Model CZ18KT. Need Timken bearing numbers or bearing sizeand the size or number of the seal in the hub please if possible. We are a retailer for bearings in Fredericton and most of New Brunswick. Thank you.
asked by: Gordon B
Expert Reply:
Thanks for your question, Gordon.
I'm more than happy to help find the right Timken bearings for you, however we don't have a way to know what bearings you need based off the trailer that you have. Depending on what hubs you have on the trailer, there may be some numbers on them that we can cross reference.
I included a picture below of a Dexter hub as an example. Even if you don't have dexter hubs, there may be a number on there that I can still search for.
Let me know know when you can!
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Pollak 7 Pole to 5 Pole Connector Adapter
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 12"
- Search Results: trailer hubs and drums
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Clean Up Your Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer tires and wheels
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Search Results: trailer jack
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Base Plate for Tow Bar
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
Gwendolyn Y.
12/1/2025
Hey Gordon, were you able to find any numbers on the hubs of your CZ18KT trailer? Once you have those, I can help match them to the right Timken bearings and seals. Let me know what you find so we can narrow it down.