Replacement Grease Seals for a Dexter 4,400 lbs Axle
Updated 11/13/2025 | Published 10/25/2025
Products Featured in This Question
Question:
I am looking for replacement Grease Seals - Double Lip - for Dexter 4,400-lb Axles. I believe the current seals are approximately 1.75 ID and 2.5 OD just using a tape measure.
asked by: Bob M
Expert Reply:
Hey Bob, thanks for the information! For Dexter 4,400 lbs axles you will need the Grease Seal item # 58846. It has a inner diameter of 1.719" and a outer diameter of 2.565". It is sold individually.
Here are the rest of the parts you'll need if you're swapping out bearings and races too.
Bearings item # L68149 and item # LM67048
Races item # L68111 and item # LM67010
Are you doing routine maintenance or did a seal blow out?
(click to enlarge)
Product Page this Question was Asked From
Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Trailer Bearings Races Seals Caps
- Seals
- EZ Lube Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Q&A: Replacement Bearings And Seals For A 2019 Grand Design 2970RL With Dexter 4.4K Axles
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Q&A: Replacement Hub Grease Seal for Dexter 4,400 lb Trailer Axle
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Shop: Replacement Shoe and Lining for 4,400-lb Nev-R-Adjust 10" x 2-1/4" Electric - RH
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Shop: Replacement Shoe and Lining for 4,400-lb Nev-R-Adjust 10" x 2-1/4" Electric - LH
- Search Results: trailer hubs and drums
- Search Results: dexter axle grease seals
- Video: Comprehensive Review: Bearing Packer
- Shop: Grease Seal - Single Lip - I.D. 1.938" / O.D. 2.510" for Mobile Home Utility Axle
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Search Results: dexter 010 019 00
- Search Results: bearing packer
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Suspension Enhancement
- Search Results: trailer leaf springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Gooseneck Hitch
on Trailer Bearings Races Seals Caps
Jerred H.
11/13/2025
Hey Bob, how did the new grease seals work out on your Dexter 4,400‑lb axles? Did the fit match up with your measurements? Your update could make it easier for the next person doing the same maintenance.