Will The SnowBear Snowplow K2AVAL8219 Work With The Front Hitch On A 2021 Toyota Tundra?

Question

Question:

Will Snow Bear work with my 2021 Tundra? It has a front-mounted 2 trailer hitch.

asked by: Charlie G

0

Expert Reply:

Hi Charlie!

Having the front mount hitch already installed on your 2021 Toyota Tundra will indeed allow for the SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall # K2AVAL8219 to be used. We actually have this a kit with the Curt front hitch # 31198 for those that don't already have one, so you are good to go with just the plow.

Where are you located? We are supposed to get a pretty harsh winter here in Missouri this year.

expert reply by: Lazer S

0

Charlie G.

10/24/2025

Located in Massachusetts. I'm curious as to whether the plow can be lifted and dropped from inside the truck cab (remotely, via hydraulics), rather than having to manually lift-for-transport and drop-for-plowing, via going outside to front of truck.

Lazer S.

10/29/2025

@CharlieG The SnowBear Snow Plow # K2AVAL8219 comes with a wireless remote and a switch that can be installed in your cab, so you definitely have options for lifting and lowering without having to go out into the cold. Which will probably be a lot colder in Massachusetts than Missouri! Stay safe and warm out there and let me know if there is anything else I can help with! : )

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hey Marc! The +/-5% accuracy specification refers to the scale's measurement tolerance. On a 2,000-lb capacity scale, that works out to about +/-100 lbs. at full capacity. As you pointed out, if you were measuring a much lighter tongue weight,…

view full answer...

Answer 3

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Answer 4

Hey William, we've got you covered! Excellent choice to improve ride quality, my favorite thing about the Firestone Ride-Rite Air Bags #F79XV is the wireless control lets you adjust everything right from your phone. The link will take you to our…

view full answer...

Answer 5

Hey Steve! I just heard back from Dexter and you have a 3,500 lb axle. For self-adjusting brakes you can use the etrailer Electric Trailer Brakes #AKEBRK-35-SA. If you prefer Dexter brakes then you need the Nev-R-Adjust #23-468-469. For bearings and…

view full answer...

Answer 6

Hey Gary. The Draw-Tite Front Hitch item #65031 is going to mount a bit higher on your 2004 Toyota Tundra compared to the Curt item #31180. The Curt Front Hitch item #31180 is 14-3/4" off the ground when measured from the top of the inside of…

view full answer...

Answer 7

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Will The SnowBear Snowplow K2AVAL8219 Work With The Front Hitch On A 2021 Toyota Tundra?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching