Parts Needed to Add Brakes to a 3.5K Single Axle Trailer
Updated 10/30/2025 | Published 10/11/2025 >
Products Featured in This Question
Question:
I have a single axle v-nose I am planning to add brakes to. It has a Dexter 3.5k axle Dex1387518. Mounting plates for brakes are there. 5 on 4.5 205/75/15 wheels/tires. If I want the nev-r-adjust brakes, what hubs go with it?
asked by: Michael J
Expert Reply:
Hey Michael, thanks for reaching out!
The Dexter Nev-R-Adjust Electric Trailer Brakes # 23-468-469 are an excellent choice, and will pair nicely with the Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ. This hub and drum comes pre-greased to it's less you have to do during the installation as well.
Since you're adding brakes to this trailer for the first time, you'll also need the Bright Way Trailer Breakaway Kit # 3802346 as well as 10 Gauge Wire # 10-1-1, Butt Connectors # DW05745-10, and a Junction Box # e99011 (if you don't already have a 7-Way).
What made you want to add brakes to your trailer?
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Bright Way Trailer Breakaway Kit with Charger, LED Tester, and 5 Ah Battery - Side Load
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Search Results: breakaway
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: 10 Gauge Wire - Blue Primary - Per Foot
- Shop: 14 Gauge, 7 Conductor Jacketed Wire - Per Foot
- Search Results: redarc liberty
- Q&A: Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
- Search Results: redarc
- Search Results: trailer brake controller
- Search Results: tow pro elite
- Q&A: Can Trailer Brakes be Added to Dexter 3,500 lb Axle with 4 inch Drop
- Search Results: junction box
- Search Results: ground wire
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Parts Needed to Install a Red Arc Brake Controller in a 2023 Toyota Tacoma
- Article: How to Measure for Trailer Hitch Drop
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes






Jon G.
10/30/2025
Hey Michael, how did everything go adding the Nev-R-Adjust brakes and hub and drum assembly to your trailer? Your setup sounds solid for that Dexter axle. Sharing how it turned out could help others planning the same upgrade.