Replacement Bearing Kit for a 2010 Forest River Sabre 28RETS 5th Wheel
Updated 11/04/2025 | Published 10/02/2025
Products Featured in This Question
Question:
I have a 2010 28RETS Sabre fifth wheel axle LCI52-SB-85-68.5-NOSP-OS-SBS-655-1/2-7225-30PT The wheel bearings have decided to retire. A local dealer called Lippert and was told nothing was available but, they could use my axle number to build me 2 new axles. Thank you for your time
asked by: John
Expert Reply:
Hey John!
The LCI52 part of the axle ID means you have a 5,200 lb axle. There's no way it has super special bearings so you likely need one of the following kits (the only difference is the grease seal ID size):
- Bearing Kit # BK3-310 (2.125" Seal ID)
- Bearing Kit # BK3-300 (2.250" Seal ID)
Just verify which seal ID your spindle uses and you'll be good to go with one of these bearing kits!
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Q&A: Will the 6,000 lbs Dexter Nev-R-Adjust Electric Trailer Brakes Work on a 5,200 lbs Axle?
- Q&A: Bearing Replacements for Dexter 5,000 lb Trailer Axle
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: Bearing Kit for Dexter Trailer Axle D52
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Are Dexter Bearing Kits as Good as Timbren Bearing Kits for Trailer Axle
- Q&A: Replacement Bearings and Grease Seals for 2024 Outdoors RV Black Stone 260KVS
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Double-Eye Trailer Suspension System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
Jon G.
10/30/2025
Hey John, did one of those bearing kits end up working for your Sabre’s 5,200 lb axle? Knowing which seal ID matched could really help others trying to replace their wheel bearings too.