Cover For A 2013 Koala Super Lite Series M-21CS

Question

Question:

I have a 2013 Koala 21CS camper that I want a storage cover for. I do not see the make and model listed in your Vehicle window. What product do you recommend?

asked by: Tom D

0

Expert Reply:

Hi Tom!

It looks like your 2013 Koala Super Lite Series M-21CS measures a little over 24 feet long, so I think the following two covers would be the best options for you.

etrailer RV Cover for Travel Trailers up to 27' Long - Gray # e37VV
Classic Accessories ProTop4 RV Cover for Travel Trailers up to 27' Long - Gray # CA95DY

Think of the etrailer cover as the good option and the Classic Accessories cover as the better option, but the price will reflect that. What kind of weather do you typically get where your camper will be stored?

expert reply by: Lazer S

0

Classic Accessories ProTop4 CA95DY
(click to enlarge)

etrailer RV Cover e37VV
(click to enlarge)

Lazer S.

10/22/2025

Hey Tom, how did the cover you chose work out for your Koala camper? Did it give you the protection you needed in your local weather? Your update could make it easier for the next person with the same setup.

Answer 1

Hey Jon, since the 2022 NASH 23d travel trailer is right at 26 feet in length I would recommend the Classic Accessories ProTop4 part #CA95DY that is correct fit for that size travel trailer and also holds up really well in all climates and is easier…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Cover For A 2013 Koala Super Lite Series M-21CS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching