How Long is the Cord on the Hardwired Mounting Kit for Hughes Autoformers 50 Amp Voltage Booster?

Question

Question:

how long is the included 50 amp plug and cord? thank you

asked by: Leroy G

0

Expert Reply:

Hey Leroy. The Hardwired Mounting Kit for Hughes Autoformers 50 Amp Voltage Booster item # HU34FR, includes a 5' long plug and cord.

What kind of trailer do you have?

expert reply by: Jerred H

0

Hughes Autoformers
(click to enlarge)

Jerred H.

9/29/2025

Hey Leroy, did the 5' long plug and cord work well for your setup? I'm asking because it could help others who are considering similar installations.

Answer 1

Good thinking, Andy - good name btw. The Watchdog Surge Protector / Voltage Booster 50A #HU74ZR is a hefty unit, but it does sit outside at the pedestal, so security matters. It has a metal loop built in for a padlock or cable lock, which you can run…

view full answer...

Answer 2

Hey Shawn, congrats on the new 5th wheel trailer. The Watchdog Power Center Surge Protector and Voltage Booster item #HU74ZR is all you're going to need. Adding in the Power Watchdog Surge Protector item #HU82VR would be redundant. The item…

view full answer...

Answer 3

Hey David, do you mean to cut the plug off of the Watchdog Power Center Surge Protector and Voltage Booster #HU74ZR and then wire it to your RV outlet? If so, it would be just a matter of cutting and stripping wires to pull this off.

view full answer...

Answer 4

Steve, you’re right to ask. The Watchdog Power Center Surge Protector for RVs and campers #HU74ZR should never be mounted on its back. It’s designed to rest on its legs in the upright position so the ventilation slots can do their job. If it’s laid…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hi there Chris, great question. Yes the Redarc #RED87CR is truly a plug and play brake controller for your 2026 Ram 1500. It connects directly to the factory tow controller connector under the dash, so there’s no dealer programming required like you…

view full answer...

Answer 8

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 9

Hey Steve. The 12.5K Weigh Safe True Tow Weight Distribution Hitch item #WS94RR is going to be the best option for your Jayco trailer. You've done your homework well and with the range of 760 lbs - 1,160 lbs tongue you are not going to want to go…

view full answer...

Answer 10

Hey, James! We do carry a Tekonsha harness that will work for you. Harness part 3024-P will fit your new 2026 Ram 1500 truck. We are in the midst of updating fitments for the 2026 year so our site may not show it has a fit but I've made sure that…

view full answer...

Answer 11

Hey Leroy. The Hardwired Mounting Kit for Hughes Autoformers 50 Amp Voltage Booster item #HU34FR, includes a 5' long plug and cord. What kind of trailer do you have?

view full answer...

Answer 12

Hey Rick, thanks for the pictures. Sounds like a tough situation but congrats on your new truck. The base rails can be cut on the Thule TracRac SR Sliding Truck Bed Ladder Rack item #TH43003XT-501. This will allow you to install the rack on your 2026…

view full answer...

How Long is the Cord on the Hardwired Mounting Kit for Hughes Autoformers 50 Amp Voltage Booster?

Product Page this Question was Asked From

Continue Researching