Video Transcript for Review of Hughes Autoformers Power Center Mounting Bracket - HU26RR

Hi, everyone. Steve here with etrailer. Today we're taking a quick look together at the Watchdog Power Center Mounting Bracket. That's right, folks. This mounting bracket has been built and is model-specific. Basically, you put these arms over the, excuse me, the watchdog power center.

And then you would be able to then tighten these down using these buckles here. And you can swap out these for longer ones, depending on which unit you're using it for. And I do wanna throw up an image. This fits the Watchdog Power Center 30 amp and the 50 amp, both sold separately. I'll put those item numbers on the screen for each one respectively.

And just to make sure that you are getting exactly what you need to fit what you should already have or that you're looking for. Again, this is built for both of those. This is going to help prevent shifting while on the road by holding that down tight. And basically you have hardware you see before me. You're gonna bolt this down or screw this into wherever you want to keep it nice and tight.

And it does have rubber padding on both of these (metal clanking) angle brackets. And then you can see the back here. Same thing, you could screw this in place as well, depending on how or where you wanna mount it. And you've got foam backing here as well to keep everything nice and clean and stable. As always, reach out to us if you have any further questions about this or any other product, and have a great day.

.