Recommended Suspension Upgrade for a 2022 Ram 2500 w/ Factory Air Ride

Question

Question:

I have a 2022 Ram 2500 with factory Air ride the problem Im having is Rocking side to side when Im pulling my 5th wheel camper the suspension is at max load capacity, I get the warning light that air system has reached max load, what is the best way to fix this problem? thanks

asked by: Joseph D

0

Expert Reply:

Hey Joseph. Since your 2022 Ram 2500 has the factory air suspension, I recommend adding the Timbren Rear Suspension Enhancement System item # TDR2500D. These progressive rate springs install where your bump stops are currently mounted. The more weight you put on them the more they will engage and support your truck's suspension.

What kind of 5th wheel trailer do you have?

expert reply by: Jerred H

0

Joseph N.

8/27/2025

I have a Grand design Solitude, I also pull a trailer with a Polaris ranger behind it I weighed the unit on a Cat scale Steer axle 5160lb Drive axle 7000 lb Camper and trailer combined 17,400 lb Total 29,560 lb With the air ride maintaining normal ride height will this extra load cells get any extra weight on them the rear of truck does not squat. Will it effect the ride when the truck is empty?

Jerred H.

8/27/2025

@JosephN The side to side issue makes more sense now. Do you get that feeling when you're not towing a trailer behind your 5th wheel trailer? If you don't the problem is sway with your tandem trailer set up and I do not have anything that will address that. If your air ride maxed out is keeping your suspension from sagging then there most likely won't be enough weight on the rear end to engage the springs. You could lower the air pressure and let the Timbren's engage and see if that helps. The Timbren Rear Suspension Enhancement System item # TDR2500D will affect your ride when your truck is empty.

Joseph

8/27/2025

@JerredH Is there a heavy duty shock available for the rams with air ride

Jerred H.

8/27/2025

@Joseph We do not have one. Do you get that side to side feeling when you're not towing a trailer behind your 5th wheel trailer?

See All (4) Replies to Joseph N. ∨

Answer 1

Hello Bill, that is an interesting question. If one of your brake assemblies is getting constant 12v power and locking up, then yes, cutting the wire would release the magnet and stop the brake from engaging. If something else is causing the brake to…

view full answer...

Answer 2

There are several ways that you can cut off the power to your trailer brakes. The easiest option would be to simply unplug your brake controller. If the brake controller is disconnected, the brakes will not receive power. If your brake controller was…

view full answer...

Answer 3

Most newer model RV's can handle up to 100PSI but it's recommended to stay under 60PSI. Most manufacturers recommend keeping the PSI in the 40-50 range with a regulator like the #37262205 but the 50-55 range reducer you bought shouldn't…

view full answer...

Answer 4

Hey Shawn. The 1-1/8" Diameter Hellwig Sway Bar item #HE73GR is going to reuse the factory end links on your 2014 Ram 2500 and is designed as a simple replacement for the stock sway bar. I recommend installing the thicker 1-1/4" Diameter…

view full answer...

Answer 5

Hey Justin, In terms of what is the right way to install them, the flat side should be towards the frame like you said. The instructions do not do the best at easily showing that. The flat side should be towards the frame. In terms of the gap for…

view full answer...

Answer 6

No, you're going to want to use the Hellwig Adjustable Rear Anti-Sway Bar item #HE73GR instead. This one is also 1-1/8" but it is designed for trucks with a stock ride height or the ones that have been lifted up to 2". It is confirmed…

view full answer...

Answer 7

Hey John! The SumoSprings Rebel Custom Helper Springs #SS27GR will definitely help with the rear sag on your 2019 Ram 2500. However, I wouldn't expect to see a large difference with only 1" - 1-1/2" of sag in the rear. The SumoSprings…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Suspension Upgrade for a 2022 Ram 2500 w/ Factory Air Ride

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching