Recommended Hellwig Anti-Sway Bar for a 2018 Ram 2500

Question

Question:

It says it fits trucks with a 4-6 inch lift. Will it also fit my 2018 Ram 2500 4x4 6.7L stock lift? Thanks

asked by: Dave R

0

Expert Reply:

No, you're going to want to use the Hellwig Adjustable Rear Anti-Sway Bar item # HE73GR instead. This one is also 1-1/8" but it is designed for trucks with a stock ride height or the ones that have been lifted up to 2". It is confirmed to fit the 4WD 2018 Ram 2500.

The Hellwig item # HE95YR you were looking at is designed for trucks with a big aftermarket lift in the rear end and won't work with stock heights.

expert reply by: Jerred H

0

Answer 1

Hey Howard! Are you experiencing sway all over in the truck or primarily at the rear? Do you have the 4WD model? The Hellwig Front Anti-Sway Bar #HE55GR you were looking at is designed for the 4WD and will help, but primarily with the front. If…

view full answer...

Answer 2

Hey Shawn. The 1-1/8" Diameter Hellwig Sway Bar item #HE73GR is going to reuse the factory end links on your 2014 Ram 2500 and is designed as a simple replacement for the stock sway bar. I recommend installing the thicker 1-1/4" Diameter…

view full answer...

Answer 3

The Roadmaster Anti-Sway Bars we offer for a 2014 Dodge Ram 3500 like part #RM-1129-130, are designed to only work with Dually pick-ups. If you have a Dually this will attach to the rear axle of your truck and help reduce body roll and balance weight…

view full answer...

Answer 4

Robert, the Hellwig Rear Anti-Sway Bar #HE83GR (1 1/8"), #HE75YR (1 1/8"; for lifted vehicles 2"), and #HE24MR (1 5/16") will all fit your 2024 Ram 3500. You'd need to measure the diameter of your current sway bars and pick…

view full answer...

Answer 5

The Roadmaster Rear Anti-Sway Bar #RM-1129-135 will replace your factory sway bar on your 2017 Ram 2500 with a stronger bar and polyurethane bushings. If your only issue is sway this is what you need to help reduce sway. If you are also dealing with…

view full answer...

Answer 6

Hey Justin, In terms of what is the right way to install them, the flat side should be towards the frame like you said. The instructions do not do the best at easily showing that. The flat side should be towards the frame. In terms of the gap for…

view full answer...

Answer 7

Hey John! The SumoSprings Rebel Custom Helper Springs #SS27GR will definitely help with the rear sag on your 2019 Ram 2500. However, I wouldn't expect to see a large difference with only 1" - 1-1/2" of sag in the rear. The SumoSprings…

view full answer...

Answer 8

Hey Joseph. Since your 2022 Ram 2500 has the factory air suspension, I recommend adding the Timbren Rear Suspension Enhancement System item #TDR2500D. These progressive rate springs install where your bump stops are currently mounted. The more weight…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Hellwig Anti-Sway Bar for a 2018 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching