2015 Toyota Tundra TorkLift Tie-Downs Rubbing Against Cab Mounts

Question

Question:

Camping World installed TorkLift tie downs on my 2015 Toyota Tundra for our Lance truck camper. After a few weeks creeking and clunky sounds develpoed without the camper on the truck. Our Toyota service department discovered that the front tie downs are rubbing against the cab mounts . I dont see the cab mounts in your 2016 Tundra video. Do you think that they may have installed the wrong tie downs? Id take it back to Camping World but thats a 6-7 hour drive.

asked by: Mark D

0

Expert Reply:

Hey Mark, thanks for reaching out!

I see that you already ordered the TorkLift Camper Tie-Downs # TLT2307 for your 2015 Toyota Tundra. What did you end up finding out?

expert reply by: Jon G

0

Mark D.

8/27/2025

Hi Jon. Can you check with TorkLift to see if there are any issues with the front tie down mounts rubbing the cab mounts on a 2015 Toyota Tundra CrewMax? The master mechanic at our local Toyota service department discover the issue which is causing irritating noises while traveling, even without the truck camper. Thanks, Mark

Jon G.

8/28/2025

@MarkD I just reached out to them and they got back with me asking for pictures of whats going on as they haven't heard of this before. If you send photos in a reply to the email you got from me I'd be more than happy to pass it along for you!

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

2015 Toyota Tundra TorkLift Tie-Downs Rubbing Against Cab Mounts

Product Page this Question was Asked From

Continue Researching