Will The etrailer Hitch e98844 Fit A 2018 Toyota Highlander XLE Hybrid?

Question

Question:

Will this fit a 2018 Highlander Hybrid xle? I want to make sure the hybrid has the same available mounting points. Thanks.

asked by: Scott M

0

Expert Reply:

Hi Scott!

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98844 will fit all models/trim options for the 2018 Toyota Highlander XLE, including your Hybrid. The only notes we have on the install is there will be some trimming or removal of an underbody panel required for the installation (I included an install video we did showing this) and it will fit with a full size spare tire stowed under vehicle unless said spare is on an Aluminum rim, which is too wide.

What are you planning on using the hitch for?

expert reply by: Lazer S

0

etrailer Hitch On 2018 Highlander
(click to enlarge)

Scott M.

8/26/2025

Ok thanks! Glad to hear it. I’ll also watch the video. I’ll mainly use it for a bike rack or cargo rack. That being said, if I ever wanted to do lightweight towing, is there an option to get a hitch and hook up electrical as well?

Lazer S.

8/26/2025

@ScottM This will work perfectly for that! We do also have wiring available, but it will depend on if you have the factory tow package. This doesn't mean your Highlander would have come with a hitch, so I would contact a local Toyota dealer and have them run your VIN to see if you have it or not. I have both options listed below: With Tow Package: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 56042 Without Tow Package: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56217

Scott M.

8/26/2025

@LazerS Thank you!

Lazer S.

8/26/2025

@ScottM You're welcome. Let me know if you have any other questions! : )

Answer 1

The spare tire for a 2019 Toyota Highlander is stored under the vehicle. If you check out the attached installation video for the etrailer Trailer Hitch Receiver #e98844 you can see the empty location under the vehicle where the spare tire should be.…

view full answer...

Answer 2

Hey Jeff, so I don't have a great solution but if you really need a hitch installed on your 2015 Toyota Highlander what you'd need to do is install a hitch like the etrailer part #e98844 and then source a non-aluminum spare so that you can…

view full answer...

Answer 3

Hey Shannon, I can absolutely get you set up and ready to tow! The great thing about the hitch for your Toyota is that it is a no drill installation. Your vehicle already has pre drilled holes ready for a hitch. I recommend the etrailer #e98844 class…

view full answer...

Answer 4

You want the best, because there can be only one. But the best depends on what you're using it for or what appeals to you. Basically, I've narrowed it down to two options. The best for actual use is the etrailer Hitch #e98844 because if…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will The etrailer Hitch e98844 Fit A 2018 Toyota Highlander XLE Hybrid?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching