How to Attach the Curt Auxiliary LED Indicator Lights to a Bike Rack

Question

Question:

I am inquiring about part C53201 Curt Auxiliary led lights. I want to use this on my bike rack. How does it mount? Do I rivet it to the rack? Thanks

asked by: Ronald A

0

Expert Reply:

Hey Ronald. The Curt Auxiliary LED Indicator Lights item # C53201 have 3M adhesive strips on the back of them. I recommend using these strips and some black zip ties to secure the lights and route the cables through to your vehicle's 4-way connector.

What kind of bikes do you have?

expert reply by: Jerred H

0

LED Indicator Lights
(click to enlarge)

Jerred H.

8/15/2025

Hey Ronald, did the adhesive strips and zip ties work well for mounting the lights on your bike rack? I'm curious to know because it could really help others looking to do the same!

Answer 1

Since your 2023 Dodge Charger Pursuit has the V6 engine we know it isn't an SRT, Hellcat, or Demon. This means you can use the Curt Trailer Hitch Receiver #C13236. This is a Class III hitch with a 2" receiver, bolt-on installation, and a…

view full answer...

Answer 2

Hi Steve; the Curt Auxiliary LED Indicator Lights #C53201 won't be able to spread out that far. You only have 15" on the wire with the lights since the lights are 7" of that 22" length. Then the main wiring harness doesn't…

view full answer...

Answer 3

Hey Barb, since the Curt Aux LED Light Indicator part #C53201 plugs into trailer wiring and does not tie into or replace your vehicle taillights you wouldn't have any hyperflashing issues or have to install any load resistors.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

How to Attach the Curt Auxiliary LED Indicator Lights to a Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching