Suspension Enhancement For Occasional Towing With A 2006 Dodge Ram 3500

Question

Question:

I have a Dodge Ram 3500 Mega cab 1 ton. Will the Sumo Springs part SSR-302-54 be the best choice for me? Occasionally pull a SUPER LITE 28foot travel trailer.

asked by: William M

0

Expert Reply:

Hi William!

The SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-302-54 Would be a large improvement over the stock jounces on your 2006 Dodge Ram 3500 Mega Cab. Plus they are easy to install and American made, which is always nice. However, I wouldn't say they are the best.

Now if you really want the best option for occasional towing, I would get the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3613-HD. These help with sag and I have heard numerous people say that their ride is better even when not towing. They are a bit expensive, but they really do a good job. They are also American made and easy to install. But, they do not fit vehicles with factory top overload springs or models with dual rear wheels.

Are you getting a lot of sag when you tow?

expert reply by: Lazer S

0

Lazer S.

8/15/2025

Hey William, Did you notice any improvement with the SumoSprings on your Ram when towing your travel trailer? I'm curious because it could really help others in similar situations.

Answer 1

Yes, the SumoSprings #SSR-302-54 will replace the factory bump stops on your 2015 Ram 3500. They will bolt in place of them. Once installed the springs may make contact with the axle when unloaded but will definitely engage when weight is put in the…

view full answer...

Answer 2

With you already having the 4000 pound SuperSprings, and the Hellwig antisway bar the SumoSprings #SSR-302-54 would be a great addition to help with the little bit of squat you have left. They have a capacity of up to 2,800 pounds and they're…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 9

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 10

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 11

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 12

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Suspension Enhancement For Occasional Towing With A 2006 Dodge Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching