Recommended TorkLift Tie Downs for a 2025 GMC Sierra 2500 w/ a 6-3/4' Bed and a Factory Hitch

Question

Question:

I have the Fast Guns. I need frame mounts for my new 2025 2500 HD GMC AT4, 6.5 bed, cab length boards, factory hitch. Confusing which frame mounts I need. Thanks!

asked by: Robert M

0

Expert Reply:

Hey Bob, thanks for the information and congrats on the new truck. The correct tie downs for your 2025 GMC Sierra 2500 are the TorkLift Tie Downs - Custom Frame Mount - Front and Rear item # TL86NR. This is a set of custom fit front and rear tie downs that work with the 6-3/4' bed models with a factory hitch. They'll work great with your FastGun turnbuckles.

What kind of in-bed camper do you have? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

0

Jerred H.

9/2/2025

Hey Bob, did the TorkLift Tie Downs work well with your FastGun turnbuckles on your new truck? I'm asking because your experience could really help others looking for the right fit for their setup.

Answer 1

Hello Volker, thanks for reaching out. For your 2024 Chevy Silverado 2500 6.5' bed with steps in front and back of the bed you can use the following Torklift Camper Tie Downs: - Custom Fit Tie Down Kit #TL86NR Keep in mind that these will only…

view full answer...

Answer 2

Hi Ron; thank you for that info. The correct tie-downs for your 2025 Silverado 2500 are the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL86NR. I also recommend the TorkLift Locking FastGun Turnbuckles #TLS9529-2-LK. These turnbuckles…

view full answer...

Answer 3

Hello Alan, thanks for reaching out. I see you already placed an order for the TorkLift Tie Downs #TL86NR. I just wanted to touch base and confirm the Tie Downs you ordered are correct for the 2025 GMC 2500 Denali with the 6-3/4' bed. They will…

view full answer...

Answer 4

Hey Daniel, I actually would disagree with your sales guy on whether you need a sliding hitch or not. The short bed of your 2025 Chevy Silverado 3500 is actually one of the longest "short" beds made so that adds turning clearance. Your…

view full answer...

Answer 5

Hey Scott! The #TL86NR is designed to fit the 6-3/4' bed. Do you have running boards? What kind of hitch do you have? If you have no running boards or cab length running boards with a factory or TorkLift hitch you need the #TL94PR. If you have no…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended TorkLift Tie Downs for a 2025 GMC Sierra 2500 w/ a 6-3/4' Bed and a Factory Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching