Availability of Hitch For 2016 Forest River Rockwood Roo 23WS With 68-1/4 Frame for VelociRAX 5-Bike
Updated 09/12/2025 | Published 05/26/2025
Products Featured in This Question
Question:
I need a trailer hitch reciever to put on the back of my 2016 rockwood roo 23ws. The frame width is like 68 1/4 inches. This will be used for a velocirax 5 bike rack that is 98 lbs and states it needs a 500 lb tongue weight and can not be used with a bumper mounted hitch.
asked by: Andrew
Expert Reply:
Hi Andrew; can you double check that frame measurement? Assuming that is correct, the only hitches that can accommodate your 68-1/4" frame don't have a high enough tongue weight capacity. The # C13704 you looked at has the necessary max tongue weight but only fits frames up to 66" wide.
We have some Class V weld-on hitches with a 2" receiver but they max out at 62" so those won't work either. Unless your frame measurement is off I think the only solution is to take the # E-11 to a local fabricator and have them fashion a custom hitch for your trailer. Make sure they don't cut the receiver down too much since you need 3-3/8" of depth past the center of the hitch pin hole for the VelociRAX to fit properly.
If you have any other questions don't hesitate to reply below.
(click to enlarge)
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 500 lbs TW
- 5000 lbs GTW
- 22 - 66 Inch Wide Frames
- Towing and Cargo
- Bolt-On
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Video: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide: The Breakdown
- Shop: Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2"
- Q&A: Recommended Trailer Hitch for a 2019 Forest River Rockwood Ultra Lite with Welded Bumper
- Q&A: Hitch for 2016 Heartland 3160 Elite
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- Shop: Stromberg Carlson Adjustable Accessory Hitch Receiver - 49-1/2" to 76-1/2" Wide - 2"
- Q&A: Will Furrion Vision S+ Wireless RV Observation System Fit FRCBRKT-BL On Camper
- Q&A: Can The Lippert 2" Accessory Receiver Hitch # LC78DX Adjust To Fit 61" Wide Frame?
- Search Results: curt trailer hitch receiver ~ custom fit ~ class iii ~ 2"
- Video: Stromberg Carlson Adjustable Accessory Hitch Receiver Feature Review
- Video: Set up: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide on a 2009 Chevrolet Kodiak
- Video: A Closer Look at the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- Video: Curt Adjustable Width RV Trailer Hitch Installation - 2017 Forest River Rockwood Mini Lite Travel Tr
- Shop: Lippert 2" Trailer Hitch Receiver for Campers and Trailers - 72" Width
- Shop: Lippert Accessory Hitch Receiver for RVs w/ 69" Wide Frames - 2" - 300 lbs
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer jack
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
on RV and Camper Hitch
Robin H.
9/12/2025
Hey Andrew, did you have a chance to verify the frame measurement for your trailer? I'm curious to know if you were able to find a solution for mounting your bike rack. If you're still looking for a solution, I'm happy to help!