Does the EcoHitch Front Mount Hitch # EH89CR Fit the 2025 Toyota Tundra SR5 Automated Grill Louvers?

Question

Question:

Does this fit 2025 toyota tundra sr5 4x4 with automated grill louvers?

asked by: Adam

0

Expert Reply:

Hello Adam,

I reached out to the manufacturer to confirm, so my apologies for the delay.

Yes, the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" # EH89CR will fit your 2025 Toyota Tundra SR5 4X4, but the Active Air dam would need to be removed in order to install.

So now the question is, do you need the hitch more or the Active Air dam?

expert reply by: Kate F

0

Kate F.

9/12/2025

Hey Adam, did you decide to go ahead and install the hitch on your Tundra? I'm asking because your experience could help others who are considering the same setup.

Adam

9/13/2025

@KateF Yes i posted the review with the pictures. The ones with the green painters tape to mark out hitch hole

Kate F.

9/13/2025

@Adam Just went and saw your review. I feel ya on the instructions, most of them are not the greatest which is why we started doing our video content back in the day. Thanks for such the detailed review, we really appreciate it as it will be most helpful to others in the future with the same application. Sorry you had to fork out some extra money, but glad you got the job done!

Answer 1

Hey Daniel! You won't have to remove the front bumper but you'll need to take that plastic piece off in the front to cut a hole for the receiver to protrude through. The EcoHitch Hidden Front Mount Trailer Hitch item #EH89CR has been…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Does the EcoHitch Front Mount Hitch # EH89CR Fit the 2025 Toyota Tundra SR5 Automated Grill Louvers?

Product Page this Question was Asked From

Continue Researching