Does the Draw-Tite Front Trailer Hitch Fit a 2025 Nissan Frontier?

Question

Question:

Does Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2 Part Number: 65075 fit a 2025 model Nissan Frontier?

asked by: Tilden V

0

Expert Reply:

No, it does not. The bolt spacing on the Draw-Tite Front Hitch item # 65075 is 33-1/2" wide, while the 2025 Frontier has 35-1/4" spacing on the frame, which is why this hitch will not fit.

As of 5/16/25 there are no front hitches for the 2025 Nissan Frontier.

The Draw-Tite Front Hitch item # 65075 only fits the following vehicles:

2009 - 2012 Suzuki Equator 4 Wheel Drive
2005 - 2024 Nissan Frontier
2005 - 2012 Nissan Pathfinder

What are you needing a front hitch for?

expert reply by: Jerred H

0

Tilden V.

5/17/2025

I measured my truc and it is 33 1/2. Not sure your info is correct

Jerred H.

5/18/2025

@TildenV That's the answer we got from Draw-Tite and a customer who tried to install it on a 2025 and couldn't.

Nate ..

7/20/2025

@TildenV, did you end up buying this hitch? If yes did it fit? I have a 2025 pro4x. I just measured the bolt hole spacing frame to frame is 33 1/2". Hole to hole on same side is 3 1/2". Seems like it should work.

Bill

7/25/2025

@Nate I just got the same measurements on my 25 Pro4x. Hmmmmmm?

Answer 1

Hi Bill; we don't have any word on whether or not a front hitch is in the works for the 2025 Nissan Frontier PRO-4X. Draw-Tite made one for the 2024 but they don't have any updates with the refresh from the 2025 models. I can reach out to…

view full answer...

Answer 2

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does the Draw-Tite Front Trailer Hitch Fit a 2025 Nissan Frontier?

Continue Researching