bing tracking image
Q & A Icon

Replacement 4-Way and 7-Way for 2004 Ford F-150  

Updated 09/29/2025 | Published 05/09/2025

Question:

I have a 2004 F150 super cab. It has the tow package with a 4pin and a 7pin which both have quit working. What do you have that will replace it. I would like to replace both but would be satisfied with just a working 7pin,

0

Expert Reply:

Hey Denzil! I have two possible options for you. If you think it is just your factory connector that's bad you can replace what you have with the 7- and 4-Pole Trailer Connector Socket # HM40975. However, if you want to go this route I would test the wires running into your existing connector and see if they are working. Have you checked the relay/fuses as well? You might not even need a new wiring harness if you find they're bad and swap them out.

If you find that the factory wiring is bad you can bypass it all with the Curt # C59236. Then to upgrade to a 7-way you need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. This will give you a working 4-way and 7-way independent of your factory trailer wiring. If you have any other questions feel free to reply below.

expert reply by:
0
Robin H
7- and 4-Pole Trailer Connector Socket
7- and 4-Pole Trailer Connector Socket
(click to enlarge)
Robin H. profile picture

Robin H.

9/29/2025

Hey Denzil, did you have a chance to test the wires and check the relay/fuses for your F150? I'm curious if you found a solution that worked for you, as it could help others facing similar issues with their trailer connectors.

Denzil N. profile picture

Denzil N.

9/29/2025

@RobinH I am looking for original part. Not something that I have to cut wires to replace

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>