Trailer Hitch for 2024 Bronco Badlands Carrying Thule T2 Pro With Rear Spare

Question

Question:

I have a 2024 Bronco Badlands with the Sasquatch package. The factory hitch is short and doesnt allow me to use my Thule T2 Pro bicycle rack. It doesnt clear the spare. Which trailer hitch do you recommend?

asked by: Anthony C

0

Expert Reply:

Hey Anthony! I recommend the Draw-Tite Max-Frame Trailer Hitch # DT37GR. This has an extra long receiver which will give you the clearance for your bike rack. Take a look at the measurement below and compare that to what you have now to be sure. Let me know if you need anything else.

expert reply by: Robin H

0

DT37GR Measurements
(click to enlarge)

Draw-Tite Hitch on Bronco With Spare
(click to enlarge)

Anthony

5/8/2025

Thanks Robin.

Robin H.

5/8/2025

@Anthony happy to help!

Anthony

5/19/2025

Hello again Robin, A friend of mine installed this hitch on his 2024 Bronco and it fit perfectly except for 1 thing. The mounting point for the electrical connector is different than the factory hitch. Do you sell an mounting bracket that's compatible with the factory connector?

Robin H.

5/19/2025

@Anthony is it a 4-way? You can use the # 18144 which will line up to the holes on the bracket on the hitch and allow you to mount a standard 4-way. If it is something else let me know, or you can reply to the email with the link for this page and send a picture.

See All (9) Replies to Anthony ∨

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is the same thing as the 76527 hitch you already have so If it didn't fit it's not going to work. Instead, I'd recommend going with the Curt Trailer Hitch Receiver #C76WR which we…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Trailer Hitch for 2024 Bronco Badlands Carrying Thule T2 Pro With Rear Spare

Featured Help Information

Miscellaneous Media

Continue Researching