Replacement Gooseneck Pin Box for a 1716 Pin Box

Question

Question:

I have a lippert pin box for my fifth wheel that I want to upgrade to a gooseneck. RPO-0003991857 5LZBF3320MR019335 What will work for this current pin box?

asked by: Matt

0

Expert Reply:

Hey Matt! I need you to get me the LCI number and the date of manufacturing off of the sticker where you found the RPO number. If you could comment below with this information I can identify your bolt pattern and find you the correct gooseneck pin box.

expert reply by: Jerred H

0

Matt

4/21/2025

Jerred, Thanks for reaching out. That information is LCI Item Number: 7625611 Chassis MFG Date: 03/13/20. Regards.

Jerred H.

4/21/2025

@Matt You're welcome! Thanks for getting back to me so quickly! I checked with Lippert and your 5th wheel trailer has a 1716 bolt pattern. The correct gooseneck pin box for your trailer is going to be the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item # RP85FR. You will also need the Reese Safety Chain Kit with Clevis Hooks - 44" Long - 20,000 lbs item # RP49151. These are required by law and are not included with the goosebox. What kind of 5th wheel trailer do you have?

Matt

4/21/2025

@JerredH Eclipse Iconic Widelite 3322CK toyhauler.

Jerred H.

4/21/2025

@Matt That's a nice set up! The Reese Goose Box item # RP85FR has a 20,000 lbs capacity so it's definitely going to get the job done. If you have any additional questions feel free to throw them into the comment box below and I'll be happy to answer them.

See All (5) Replies to Matt ∨

Answer 1

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Replacement Gooseneck Pin Box for a 1716 Pin Box

Product Page this Question was Asked From

Continue Researching