In order to replace your Trailair Pin Box Model 1116, I recommend the Trailair Air Ride 5th Wheel Pin Box Model 1116 part # LC155943. The Trailair Flex Air 5th Wheel Pin Box Model 1621 part # LC369535 will not work. The Trailair Air Ride 5th Wheel Pin Box is the same as the Trailair Flex Air 5th Wheel Pin Box save for the pivoting head but there is not a Trailair Flex Air 5th Wheel Pin Box offered for a Model 1116. view full answer...
The # 5AB-E1621-610 5th Airborne Air Ride Pin Box you mentioned can be used with the Curt Q5 5th wheel hitch.
It is the 5th Airborne Sidewinder that is not compatible with a cushioned 5th wheel hitch like the Q5. The Air Ride Pin Box you need will depend on which OEM pin box you have on your 5th wheel. The manufacturer and model number of your pin box should be printed on a sticker or plate stuck to the pin box. The # 5AB-E1621-610 you mentioned is compatible with the Fabex 665, Lippert... view full answer...
All the MORryde Cushioned 5th Wheel Pin Boxes # MR57VR, # MR37VR and # MR97VR will share the same dimensions and are nearly identical to the Lippert 1716 5th Wheel Pin Box # LC1324791. I have attached a technical drawing for the MORryde pin boxes similar to the one for the Lippert 1716 pin box that you found.
Be sure to choose the correct MORryde pin box for your trailer weight.
MORryde Cushioned 5th Wheel Pin Boxes # MR57VR Trailers up to 11,500lbs
MORryde Cushioned 5th Wheel Pin Boxes... view full answer...
Lippert states that the Trailair Flex Air 5th Wheel Pin Box # LC328484 cannot be used with any type gooseneck/5th wheel adapter. This would include the Andersen Gooseneck to 5th Wheel Adapter # AM3200.
The manufacturer has determined that the Trailair Flex Air pin box must use a traditional 5th wheel hitch.The issue with this particular pin box is there is not enough stability between the movement of the pin box and the movement around the gooseneck ball. view full answer...
Yes, the Trailair Flex Air 5th Wheel Pin Box part # LC369535 will work perfectly with an Anderson Ultimate 5th Wheel Hitch. I have spoken with Anderson in the past and they have given the go ahead for using their 5th wheel hitch with a cushioned pin so you will be just fine.
The note on the product page for the Trailair Flex Air 5th Wheel Pin Box states to not use this with a gooseneck to 5th wheel adapter but this is more or less referring to those that bolt to the bottom of the pin... view full answer...
Yes, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch # C86JR will work just fine with the Curt Flex Air 5th Wheel Pin Box # LC328492.
This pin box has a maximum towing capacity of 18,000-lbs, an internal air bag that reduces air shock, and and is designed to replace the Lippert 1621 pin box. view full answer...
The correct Curt Flex Air 5th wheel pin box for your Lippert 1621 pin box is the Curt Flex Air 5th Wheel Pin Box # LC369535 which is rated for 21,000 lbs. allowing you to maintain the full weight capacity of your Curt A20 5th Wheel Trailer Hitch # C16140. view full answer...
The 5th Airborne pin box being referenced in this question is not a Sidewinder/rotating pin box. It's actually just a standard air cushioned pin box like the # RP78FR. The degree of turnability with this setup will depend on the following factors:
1. The distance from the center of fifth wheel hitch jaw to the truck cab.
2. The length of king pin to the nose of the fifth wheel.
3. The width of trailer divided by 2 (to get half).
For example: If the distance from the center of the... view full answer...
Hi Jaime,
So it sounds like you are wanting to replace the pin box on your 5th wheel trailer with an adapter that connects to a gooseneck ball. That is definitely something you can do, but there isn't enough information here for me to answer what would work best for you. Reason for that is the specific pin box model and your trailer weight is needed to get the right adapter.
For example, if your 5th wheel trailer has a Lippert 1621 pin box, weighs no more than 21,000 lbs, and has a 2,500... view full answer...
Trailair Air Ride 5th Wheel Pin Box # LC155943 fits in place of a Lippert 1116 pin box so if that is what is on your 2005 Montana 5th wheel trailer this air ride pin box can be used. If there is no sticker or plate on the pin box indicating the manufacturer and model number of the pin box then there are some measurements you can take to determine which pin box you have. I have included a link to a help article that explains the measurements needed. view full answer...
On your SuperGlide Auto sliding 5th wheel hitch you must always have a capture plate with any 5th wheel pin box.
The Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550035 will allow you to use most normal 5th wheel hitches that use a pin box that measures between 12" and 14" wide. Locking plates are only required for cushioned and other specialty pin boxes that do not fall into the 12"-14" pin box width. view full answer...
Yes the B&W Companion OEM 5th Wheel Hitch # BWRVK3305 will work well with the Trailair Flex Air 5th Wheel Pin Box # LC328484.
There is a note saying that the Trailair Flex Air 5th Wheel Pin Box should not be used with any type of gooseneck adapter, however the B&W # BWRVK3305 is not an adapter because it mounts to the factory prep package in the bed of your truck so there is no compatibility issues.
I linked the hitch and pin box and also attached a review video for you to check out. view full answer...
You can absolutely use a sliding hitch with the Trailair Flex Air 5th Wheel Pin Box # LC369535 to replace your Lippert 1621 pin box.
This will work wonderfully with a sliding 5th wheel hitch to give you the most comfortable towing experience possible. The combination of the rubber compound on the front of the pin box and air bag inside it will absorb the shock that is so common when towing with 5th wheels so you get a far more relaxed ride than with a standard pin box.
I have added a... view full answer...
I was able to confirm your 2004 keystone Everest 5th wheel 323K has a Lippert 1621 pin box. A customer favorite for ride comfort to replace that pin box is the Trailair Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000 lbs # LC328492. This pin box has air suspension and a cushioned pad to greatly reduce jarring and chucking.
If instead you are looking for additional turning clearance, you can use the Reese Sidewinder 5th Wheel King Pin with Rotating Turret - 20,000 lbs # RP34FR. view full answer...
The Trailair Rota-Flex 5th Wheel Pin Box # LC328330 has a 1-year warranty according to the manufacturer.
This pin box is designed to replace a Lippert 1621 or 1621HD 5th wheel pin box so you'll want to make sure that's what you have by checking out the sticker or placard on your current pin box.
I've added a link to a video review for you to check out as well of the Trailair Rota-Flex 5th Wheel Pin Box # LC328330. view full answer...
Yes, you can use the Anderson Ultimate 5th Wheel Hitch with a cushioned pin box like the MORryde Cushioned 5th Wheel Pin Box part # MR37VR. view full answer...
No, the Air Ride couplers such as a 5th Airborne or TrailAir are not compatible with 5th wheel to goose neck adapters that attach to the trailer.
What I recommend is a Reese Goose Box. There are 2 Goose Boxes and they fit in place of different pin boxes.
# RP85FR fits Lippert 1621, and 1621HD pin boxes and has a 20,000 pound capacity
# RP94716-61301 fits Lippert 0115, 1116 and 1716 pin boxes and is rated for 16,000 pounds
If you do not have one of the above mentioned pin boxes let... view full answer...
Yes, the Trailair Air Ride 5th Wheel Pin Box # LC158778 is absolutely compatible with the Curt A25 5th Wheel Trailer Hitch # C16180.
This will give you an outstanding 5th wheel towing set up with the cushioned pin box of the Air Ride and the interlocking dual jaw system of the A25 combining for a much smoother, more comfortable towing experience than a standard pin box and lesser 5th wheel hitch.
This Air Ride is designed to replace Lippert 1621 and 1621HD pin boxes, and to use it with... view full answer...
Yes, we have the Gen-Y replacement pin boxes. These will bolt in place of the Lippert Rhino and let you tow your 5th wheel trailer using a gooseneck ball. You will need to find the correct pin box to match with your trailer weight as the Gen-Y has a cushioning system that will improve your ride quality. Here is a list of the pin box replacements we carry.
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - 25K GTW - 6.5K TW # GY45GR
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck... view full answer...
I will be happy to confirm for you and offer a suitable replacement. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter item # DM8550045 is not compatible with the Trailair Rota-Flex 5th Wheel Pin Box item # LC328330. The Lippert Rota-Flex states Do not use the Trailair Rota-Flex pin box with any type of gooseneck adapter.
Instead you will want to use the MORryde Cushioned 5th Wheel Pin Box item # MR84VR. This is a comparable product that also fits the 1621HD pinbox. It has an... view full answer...
Go To Results