Does etrailer Have an Install Video on the Eco Hitch for a 2025 Kia Carnaval

Question

Question:

Is there an installation video for this hitch receiver? Going to put it on a 2025 Kia Carnival Hybrid.

asked by: Dylan

0

Expert Reply:

Hey Dylan thanks for dropping by! Unfortunately we don't have any videos for the EcoHitch Hidden Trailer Hitch Receiver # EH92KR on a 2025 Kia Carnival, but if you have one and are in the Wentzville area, we'd be happy to install one on your car for free! As long as we can use it for content! If that's something you're interested in, call the customer service line and they can get you set up!

I did go to the manufacturer's website (TorkLift Central) and they do have an installation video on this part number if that would help you out a bit. It looks like you have to remove the rear fascia, no drilling is required, and then you need to temporarily lower the exhaust to install the hitch. No trimming of the rear fascia/bumper is required either!

Let me know if there is anything else I can do for you and I'd be happy to help!

expert reply by: Bryce D

0

Dylan

5/5/2025

Bryce, I’d love to have you guys do the install. Can you confirm it’ll fit the 2025 Carnival Hybrid?

Bryce D.

5/5/2025

@Dylan Hey Dylan, I hate to be the bearer of bad news, but unfortunately the EcoHitch Hidden Trailer Hitch Receiver # EH92KR is not going to fit your 2025 Kia Carnival Hybrid. As it looks right now, there is not a trailer hitch for a 2025 Kia Carnival Hybrid, so your only option would be to use a universal trailer hitch like the Adjustable Width Trailer Hitch Receiver for RVs # C13702 which will fit frames 18" to 51" wide. If you want to schedule an appointment to get this installed, you'd need to call into our customer service department and let them know what you'd like to do.

Dylan

5/5/2025

@BryceD, the pictures of the EcoHitch have it on a Carnival Hybrid (HEV symbol on the back right bumper). Couldn’t get a definitive answer from E-Trailer customer service. Will try and reach out to the manufacturer directly just to be sure.

Bryce D.

5/5/2025

@Dylan Hey Dylan thanks for pointing that out. It actually looks like recently this page was updated to include the Hybrid models as a fit, so the hitch will fit.

Answer 1

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 2

Hey Frank! I'm not sure why it isn't showing up, we definitely still have the EcoHitch Hidden Trailer Hitch Receiver #EH92KR for your 2025 Kia Carnival Hybrid. This must be the one you were quoted since they only make the hidden with the…

view full answer...

Answer 3

Hello Steven, If your rack and bikes stay at 450 pounds or less, then the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH92KR would be great for your set-up because it has a tongue weight capacity of 450 pounds. You will…

view full answer...

Answer 4

Great question Carlos, the truth is, there’s no real difference between the two hitches: Part #e36KR and Part #C67ER. They’re both made to the same specs, install the same way, and neither one requires any drilling into the frame. The main difference…

view full answer...

Answer 5

The Draw-Tite Max-Frame #75270 for your 2014 Honda Odyssey has a maximum tongue weight of 675 pounds. However, you will be limited by the lowest rated component. So you'll need to check your owner's manual and determine what your van's…

view full answer...

Answer 6

Hello Casey, thanks for reaching out. The EcoHitch #EH92KR is the correct fit for your 2024 Kia Carnival. Installing the EcoHitch #EH92KR on your Kia will not void the vehicle warranty. The hitch does replace the impact structure. These kinds of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Does etrailer Have an Install Video on the Eco Hitch for a 2025 Kia Carnaval

Product Page this Question was Asked From

Continue Researching