bing tracking image
Q & A Icon

7-Way Wiring for 2018 Ford F-150 With Factory 4-Way  

Updated 10/27/2025 | Published 03/02/2025

Products Featured in This Question



Question:

Hello, I have a 2018 ford f150 with factory 4 pin trailer connector. I would like to upgrade to a 7 pin with added 2 axle trailer brake. I am attempting to avoid cutting any wires if possible. Would you be able to point me in the right direction?

0

Expert Reply:

Hey Cory! To avoid any splicing you can use the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118283. This plugs into your factory wiring behind your bumper for a simple installation. Check out the attached picture. Once your 7-way is installed you will be able to use a brake controller like the # TK75BR you were looking at.

If you find that you don't have power running to the brake controller port under the dash you will also need the # BRK-ELECKIT. I attached some installation videos below for your reference. If you need anything else don't hesitate to reach out in the comments below.

expert reply by:
0
Robin H
T-One Vehicle Wiring Harness
T-One Vehicle Wiring Harness
(click to enlarge)
Robin H. profile picture
Etrailer Expert

Robin H.

10/27/2025

Hey Cory, how did the upgrade to the 7-way wiring harness on your F-150 turn out? Were you able to get the brake controller working without having to cut any wires? Your update could make it easier for others doing the same upgrade.


Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>